The topic Processing of sleeve cuff Details

The topic: Processing of sleeve cuff

Details of cut 4 3 2 1 1 1. Sleeve 2. Cuff sleeves 3. The stripe to processing the section of sleeve 4. Laying the cuff sleeves (glue or no glue)

1. Put down the notches on the sleeve using template to mark the bottom of the sleeves.

2. Apply the mid-line of the cuff using template to mark the middle line of the cuff

3. To incise low sleeves by the notches using scissors

4. To laying the cuff sleeves on the wrong side upper cuff by the mid-line

5. To sew allowance of upper cuff rounded the cut laying ( width of seam 7 mm)

6. To overstitch sides of the cuff, folding it face inside (width of seam 5 -7 mm)

7. To cut oversize's laying in the seams of overstitching

8. To eversion of the cuff on the upper side. To press them

9. To process the cut sleeves stripe for processing section sleeves protective edging by seam

10. To fix fold in the corner (∟ 45◦) (double reverse seam)

11. To sew up folds on the bottom slice sleeves (width of seam 5 mm)

12. To sew back the inner section of sleeves. Overcast in one step them from the front of the sleeve

13. To sew the collar to the bottom of the cut of a sleeve, removing the upper edge of the plating at the wrong side of a sleeve. Putting the cuff to the back face of the sleeve

14. Topstitch finished edge of the upper portion of the cuff on the sleeve.

The numbering sequences of lines.