switching systems The concept of pulse code

switching systems

The concept of pulse code modulation (PCM) Conversion of the primary continuous analog signal into a digital code called PCM (PCM) [1, 2, 4, 5]. In telecommunications in the binary sequence is selected as the code base, implemented with minimal hardware costs. The main operations in the PCM sampling operations are time quantization (sampling the level at a discrete time signal) and encoding. Sampling the analog signal time is a transformation in which the analog signal representing the parameter is the sum of its values at discrete points in time. In digital communication systems, used uniformly sampling an analog signal (the signal samples are produced at regular intervals). When used uniform sampling: Δt sampling interval (time interval between two consecutive samples of a discrete signal) and FD sampling frequency (the reciprocal of the sampling interval). The value of the sampling interval is chosen according to the Kotelnikov theorem (Shannon).

Kotelnikov Theorem According to the Nyquist theorem, any analog (continuous), the signal can be sampled, and rebuilt on the opposite end, if the sampling frequency is twice the upper frequency of the signal. Channel tone (main channel analog telephone channel) should occupy a strip of 300. . . 3400 Hz. Consequently, the sampling rate must be at least: Fs = 2 h 3400 = 6800 Hz. According to the recommendations of the ITU (International Telecommunication Union) for a signal transmitted on the voice channel, accepted sampling rate Fs = 8000 Hz. This facilitates the implementation of the frequency of the DSP hardware filters.

The quantization of signal The sampled amplitude pulses correspond to the instantaneous values of the signal. These transformations are called pulse amplitude modulation. Discrete transmitted one after another cyclically in the form of compacted temporarily PAM signals At any quantization of message processing appliances and transmission systems has a finite resolution, so there is no need to transmit all the infinite number of amplitude values of continuous signals, it is possible to limit a finite set. Those permitted to transmit the signal amplitude values are called quantization levels, the choice of their number determines the quality of the transmission of electrical signals PAM signal obtained by sampling is quantized by level. The difference between two adjacent levels permitted for transmission are called quantization step-Δ. The difference between the true value of the reference signal and the quantized value is called quantization error or noise.

Converting an analog signal to PCM signal

Coding the quantized reference Encoding the quantized frame called the identification of the frame with the code words. In practice the apparatus is used in the binary PCM codewords, wherein each binary word corresponds to a signal level of quantization. According to the recommendations of the ITU, was adopted 256 quantization levels (128 positive and 128 negative levels), and the codeword length - 8 binary digits (bits), Figure 3. 1, the The first eight-digit code combination determines the polarity of the encoded signal amplitude (1 - positive signal "+" 0 - negative "-"); 2, 3, 4 bits define the top of the segment in which the signal is located; 5, 6, 7, 8 bits define the number of levels in the segment.

Structure of the cycle with 2 Mbit / s speed Voice over separate channels for voice frequency telephone network is carried out in the range from 300 Hz to 3400 Hz. For organizations using digital switching primary flow path PCM 30/32. And multiframe cycle structure of a PCM-30 system are shown in Figure cycle consists of 32 time slots. Multiframe consists of 16 cycles. Cycle TC = 125 ms, which determines the frequency of repetition cycles Fts = 8 k. Hz. The duration is multiframe 16 h 125 mks = 2 ms. For each channel in a cycle stands K. I interval = 3. 9 ms. Each channel is designed for the transmission of information of 8 -bit binary code, then the duration of one bit (bit) will be b = 0. 49 microseconds. The throughput of one time slot of 64 kbit / s, then the capacity of the primary standard PCM highway is 64 * 32 = 2048 kbit / s. The loop PCM timeslots 0 and 16 are overhead channels and slots 1 to 15 and 17 to 31 are information channels.

Structure of the cycle with 2 Mbit / s speed As shown in Figure 1. 2, a digital clock positions 2 -8 takes zero time slot in every second cycle. Cyclic clock signal is a combination 0011011. To eliminate the possibility of cyclic odd clock cycles simulate zero symbols 2 -8 2 symbol intervals in these ranges is given the value 1. multiframe clock allowing to carry out cycles per superframe count is a combination of 0000 and occupies bit intervals 1 - 4 slot 16 in the loop 0. Timeslot 16 is used for transmitting signaling. In each cycle two alarm signals transmitted voice channels. The designations in Figure 1. 2: TC - telephone channel; RO, . . RI 5 - cycles in the superframe; SK - timeslot; B 1, . . B 8 - code word length of 8 bits; N - bit is reserved for international use (the symbol is not defined, now has to take the value of 1); A - Transfer of alarm signal to the equipment end of the PCM link; VI, . . V 5 - symbols intended for national use (on digital paths crossing the state borders), these symbols should have a value of 1); x - the symbol of the reserve (in the case when not in use "must be set to I); y - the symbol used to indicate a way out of multiframe clock; a, b, c, d- code for common channel signaling Organization (ACS), if b, c and n d are used for ACS, they must have the following values: b = 1, c = 0, d = I.

The structure of the cycle and multiframe of PCM 30 equipment

Definitions and concepts of the switching Switching - is a process of establishing a connection between certain input and output of the system and maintain it for the duration of the transmission of user information, and then disconnect. There is the following switching techniques [1, 2, 4]: - Switching channels; -Switching messages; - Packet switching. When switching channels, first through the link is created, then the communication channel in real time, and information can be exchanged after the exchange of communication channel collapses. When switching communications: communication is performed not in real time, through the connection between the input and output of the system is not required and redundant messages are not lost, but saved and passed on with a delay. With packet switching message is divided into blocks of a certain size - packages. Each packet is sent independently, once freed available communication channel. On the receiving side are restoring messages from packets received at different times and can be in different ways. It is called switching one-coordinate at which the connecting paths in the system are separated from one another by separation basis, where the sign of separation is meant the parameter on which separation occurs in the system connecting paths between input and output. Digital switching is a process in which the connections between the input and output of the system is set by the operation of the digital signal without converting it to analog.

The principle of transformation of the time coordinate of the digital signal (the principle of time switching) Unit or module performing the function of the switching time of the digital signal is called a time switching stage or T-stage (from time- time). Reorder one timeslot outgoing PCM lines compared with the incoming voice data transmission means from one subscriber to another. This is the time switching principle (sometimes referred to interchange time slots or moving information from channel to channel).

Illustration of time switching principle

Vector representation of time switching

The principle of transformation of the time coordinate of the digital signal (the principle of time switching) Using a vector representation of a digital switch, Figure 2. 2, into the space-time coordinates allows a somewhat different principle to describe the time of switching. If we assume an orthogonal transformation of temporal and spatial coordinates of the digital signal, we obtain the expression:

Deciphering formula For time switching ψ (s) = 0. Operation ψ (t) is a delay operation on a specific codeword set time. Time switching module disadvantage is that it is able to switch channels only one digital line. Therefore, switching N PCM lines must be N modules. A organization for interconnecting different PCM lines in series with it is necessary to include the additional equipment - unit of spatial or space-time switching.

The principle of conversion of the spatial coordinates of the digital signal (the principle of spatial switching) Unit or module of the digital switching field, performing spatial switching digital signal is called a spatial switching stage or S-stage (from space- space). The essence of the spatial coordinate conversion of digital signals is to move the time slot of the PCM line into one another while maintaining the order of the slot in the loop structures of the two lines, Figure 4. 3. Vector representation of this transformation is shown in Figure 4. 4. In this case, once again assumed an orthogonal transformation

Illustration of the principle of spatial switching

Vector representation of spatial switching

The principle of conversion of the spatial coordinates of the digital signal (the principle of spatial switching) Vector representation of this transformation is shown in Figure 4. 4. In this case, once again assumed an orthogonal transformation

Deciphering formula CP Digital, built on the space switching modules are widely used in the early stages of the digital exchanges, due to ease of implementation and low cost of implementation. However, the lack of space switch, which is switched in only one channel of the same name for all incoming and outgoing PCM lines (which means the lock when connecting dissimilar channels), led to the fact that at present, these modules are used only in combination with other types of switch modules

The principle of the space-time switching Unit or module implements a space-time coordinate transformation of a digital signal, called S / T- stage. The essence of the conversion coordinates space-time digital signals is to move a predetermined time slot of a PCM line to another to change the order of the slot in the loop structures of the two lines, Figure 4. 5.

Illustration of the principle of space-time switching

Vector representation of space-time switching

Digital switching fields 1, 2, 3, 4, 5 th grade

Principles of the construction of DSF Switching the system reflects the principles of the internal construction of switching stations and is a collection of hardware designed for operational switching. Switching system implementing digital switching function, called a digital switching system (DSS). In a digital switching system switching function provides a digital switching network (DSN). Management of all processes in the switching system carries out control complex. Digital manual is based usually on the basis of the link. Digital link manual steps referred group (S-, T or S / T-), realizing the same function of coordinate transformation of the digital signal. Depending on the number of units are distinguished double, triple and multi-tier manual. Digital manual called uniform if any connection to it is established through the same number of units. Most modern DSS have homogeneous digital manual.

Features of construction of multi-digital manual 1. Digital manuals are built using a certain number of modules. 2. The Digital manuals have a symmetric structure. Under understand symmetrical structure in which the units 1 and N, N-2 and 1, 3, . . . N-2 are identical in type and number of switching units. 3. Digital manuals almost always are duplicated because of the criticality problems in the connection box to the functioning of the whole system. 4. Digital manuals are four- because digital lines that carry time multiplexed PCM signals as four-wire.

Five classes Taking into account the symmetry and the modular construction of the entire set of synchronous digital manual switching with the functional completeness can be divided into five classes [1, 2]. In each class, you can select the basic structure and substructure formed by adding additional switching elements with advanced multiplexing (MUX) and the subsequent demultiplexing (DMUX) group of digital paths. 1. The basic structure: S 'k - T' r - S 'k. Substructure: MUX - S 'k - T' r-S 'k - DMUX. A special feature of the field is the presence of S-stage in the first and the last link, the order of the T- and S-levels within a field - a random compliance with the rules of symmetry. 2. The basic structure: T 'k - S' r - T 'k. Substructure: MUX - T 'k - S' r - T 'k - DMUX. A special feature of the field is the presence of T-stage in the first and the last link, the order of the T - and S- steps within the field - voluntary compliance with the rules of symmetry. 3. The basic structure: S / T 'k - S' r - S / T 'k. Substructure: MUX - S / T 'k - S' r - S / T 'k - DMUX. 4. The basic structure: S / T 'k. Substructure: MUX - S / T 'k - DMUX. 5. Ring digital switching fields. Although ring manuals are based on the S / T-stages (ring connector), and are in fact a kind of field grade 4, but in view of their importance and features of construction decided to allocate them in a separate class.

CSF of the First Class Initially, the basis for these types of units CSF spatial switching stage were taken, such as: PBX Sintel, DEXT had a structure field type S-S with parallel switching method. But spatial switches have a greater probability of internal blocking, so in practice become widespread structure where space switching stage Sdivided time T stages such CSF combined symmetric field.

The basic structure of a first-class CSF

CSF of the second class These types of systems are CSF: NEAX 61 (Japan), № 4 ESS (US), AXE 10, D 70, FETEX 150. Features CCU second class: - The use of additional S-steps increases the capacity and throughput capacity of the field, but do not affect the principles of its functioning; - Inputs prior multiplexing actually provides a secondary seal incoming digital lines, the subsequent demultiplexing and restores them at the outputs, resulting in increased throughput without additional S-stages; - To increase the data processing speed of the gearbox on the input, tends to produce sequentially convert to parallel. For this purpose, each incoming line is installed converter serial-parallel type, and on the output - parallel to serial.

The basic structure of the second class CSF

CSF of the third class These types of systems are CKP: MT 20/25 (France), System X (DSS) (United Kingdom), EWSD (Germany). GDTS (USA), the DTS-11 (Japan) and many others, on which you can build local, long distance and transit stations. NBI in this class are universal, because they allow to build the same type of switching system for virtually the entire range of capacities: small, medium and large. When this occurs the container capacity by increasing the number of spatial switching units, passing from simpler structures S / T-S-S / T to more complex S / T-S-S-S / T. Often the design of the switching field temporal and spatial switching stage are combined into respective blocks: a block time switching and space switching unit. Then build CP capacity is done by simply adding a certain amount of BTS and BSS (block of time switching and block of space switching)

The basic structure of the third class CSF

CSF of the fourth class These types of systems are CSF: PROTEL UT and others. fourth grade MSC are widely used due to the facilities to increase capacity of the field simply by adding S / T-stages performed in a universal integrated circuit (IC). The basis of the S / T-stage switching elements comprise or modules. When designing the capacity of a small PBX manual can be built using a single link S / T-stage having only one module (capacity typically 8/8 to 32/32 incoming / outgoing PCM lines)

The basic structure of the fourth class CSF

CSF of the fifth class These types of systems are CSF: ITT 1240 (USA), S 12 Alcatel, but the ring CSF not widespread. Links annular fields are built mostly on the ring of digital switching elements (DSE). Such DSE consists of connecting units (CU) and Group Switching Unit (GSU). One power supply consists of two DSE. Number of BP and BGK in stages depending on the number of connected terminal units (TU). The number of planes depends on the average load induced TU and predetermined Quality of Service from

The basic structure of the fifth class CSF

Construction of a subscriber interface in digital switching systems Digital Switching Systems Operation is surrounded by various telecommunication equipment other ATS (digital and analog), different user devices, transmission systems. CSC must provide an interface (interface) with analog and digital subscriber line (AL) and transmission systems [1, 2, 4]. Called interface or boundary between two functional units, which is defined by functional characteristics, common characteristics of the physical connection, signal characteristics and other characteristics depending on the specifics. The interface provides a one-time definition of connection settings between the two devices. These parameters include the type, number and function of connecting circuits, and the type and form of a sequence of signals that are transmitted by these circuits. Interfaces digital ATS Figure 6. 1: - An analog subscriber interface; - Digital subscriber interface; - ISDN subscriber interface; - Network (digital and analog) interface.

Interfaces of digital switching systems

Analog and digital terminals To enable analog lines (Subscriber or institutional production exchanges (PBXs) in the device, providing access to Digital station) uses Z-type interfaces (Z 1, Z 2, Z 3). To enable digital lines U interfaces have been identified and V. They are used to activate the AL at the main access to the ISDN network. V 2 interface is designed to enable digital substations rate of 2048 kbit / s. Through V 3 interface include digital equipment at the primary access to integrated networks, such as digital PBX. Multiplexer equipment to digital PBX interface is activated through V 4. For PCM multiplexers used to connect analog remote substations and analog PBX, the interface used for connecting digital access networks

Analog subscriber interface and the problem BORSCHT With the creation and implementation of digital exchanges have a problem switching to a digital PBX analog subscriber line (AL) to an analog telephone (SLT). These problems are described by the acronym BORSCHT

Description of BORSCHT function

Description of BORSCHT function

Addressing of organizations analog subscriber interface implementation - Approval by the form of the transmitted voice signal (function Coding - coding) and in connection with the transition from a two-wire circuit speech path to the four-and vice versa (feature Hybrid - feature difsystem); - Agreement on the levels of transmitted signals: in the direction of the TA sent to the high-level signals (function Battery feed and Ringing), in the direction of the PBX signals must not be sent (ATSC built on LSI and VLSI powered 5. . . 12 V). - Providing subscriber signaling (Signalling function - alarm). Testing functions (control) and Overvoltage protection (protection from hazardous voltages) do not apply directly to the company analog interface of the SL, but their implementation allows you to automate the process of operation of the SL and TA, as well as ATSC protect against hazardous voltages.

Network interfaces of digital ATS (STS)

The concept of network interfaces of STS According to the recommendations Q. 501 -Q. 517 analog or digital trunks through the STS includes a network interface types A, B and C [1, 4]. Connected via an interface A digital paths, multiplexed PCM-30 apparatus (2048 kbit / s) or PCM-24 (1544 kbit / s). The interface for connecting digital paths multiplexed PCM-120 apparatus (8, 844 kbit / s). Analog two or four wire line included in the station end digital exchange via interface C. The analog-to-digital converters for these lines are part of a digital STS equipment.

Features connecting network interfaces with a DSP In conjunction with other digital STS, or when establishing between analog and digital STS digital transmission system arranged on the first digital interface. In this case, it realized one of the most important advantages of CSF, which is to create a single digital representation of information in a path of "transmission - switching". Thus, the representation of the speech signal as a PCM signal (64 kbit / s, 8 bits in the code word) is similar both for digital switching systems, and apparatus for the DSP. But there are several problems with regard to interfaces and DSP digital switching systems. In - First, the telephone network can be used (and are actually used) DSP are not included in the hierarchy of the ITU transmission systems (eg, PCM - 15, special DSP AL). In - the second, due to the peculiarities of construction of digital manual cycles structure inside them is different from the structure of DSP cycles. ITU has determined that they will not put forward any demands regarding the structure of the PCM cycle paths within the CSK. Digital PBX Developers have the ability to carry out at its own discretion temporary seal PCM streams (secondary Multiplexing) STS, change the length of the codeword. B - Third, encoding words in the PCM line and inside the STS varies. To the digital interface, DSP and digital STS imposed two sets of requirements: power and logic. The need to harmonize structures cycles indicates that the input should be formed DSP cycles corresponding to the requirements of this DSP. This agreement is usually carried out in the secondary demultiplexing within the STS. The logical transformation comprises matching NDV 3 linear code signal into a binary code and vice versa to synchronize the input signals in accordance with clock signals stations.

Interface with analog trunks and connecting lines (CL) For connection of analog and digital PBX using existing or newly created analog physical connecting line (SL). In this case, for each analog trunk signaling system organized a separate interface. Figure 7. 1 shows the principles of coordination of digital EATS 200 urban stations such as ATSC and ATSKU for twowire physical trunks with signaling DC

EATS 200 communication scheme with electromechanical STSC (RSL - CO relays)

Driving matching device

Interface with analog trunks and transmission systems Matching device, Figure 7. 2, can be divided into two parts: the channel and signal synchronization. Scheme placed in channels matching device is converted DC signal sending physical connecting line signals supplied to the control unit. The channel portion does not produce any logical processing signals coming from the line. The control unit gates signaling information of each trunk in 2 ms. By carrying out a report, it processes it and sends a corresponding message frames (according to code 16 of the slot 30 PCM) in conjugating unit that performs block matching control apparatus for a PCM interface oppositely principle. All necessary for matching devices, timing signals generates a block clock synchronism.

The interface with an access network Under an access network subscriber categories understand the nomenclature (voice, data, video) and communication media (metallic and fiber optic cable, wireless). Universal interface that allows to combine all subscriber access technologies into a single network - access network, called the V 5 - interface access network [1, 4]. V 5 interface has two varieties - V 5. 1 and V 5. 2. V 5. 1 interface can be connected to the PBX via a digital path 2048 kbit / s up to 30 analog AL without concentration. In this signaling is carried over a common channel. V 5. 2 interface comprises a plurality (16) paths of 2048 kbit / s, and supports a concentration ratio of not more than 8 and dynamic assignment of time slots. This is the fundamental difference between V 5. 1 and V 5. 2 interfaces. Timeslots (in the interface specification - bearers) V 5. 1 interface is rigidly fixed to the digital TV subscriber paths, ie, between the channels there is a constant connection. The V 5. 2 interface rigid fixing bearers of the subscriber channels missing ports. Thus, due to the possibility of concentration, the amount used in the interface bearer channels is always less than the number of served channels subscriber ports. The carrier channel V 5. 2 interface is available only to the user port channel for which communication service is requested and only for the duration of use of this service. In each path 2048 kbit / s signaling channel number may be provided. Comparative characteristics of the V 5. 1 and V 5. 2 interfaces, are shown in Table 7. 1.

Table 7. 1. - Comparative characteristics of V 5. 1 and V 5. 2 interfaces

Interface with TMN network Telecommunications Management Network - TMN (Telecommunication Management Network) proposed by the ITU as a unified concept of management for a wide range of network equipment and different class of problems. TMN network provides standardized interfaces, management, routing for networks with different equipment, different versions from different manufacturers TMN is conceptually a separate network, drawing 7. 3, connected through a special interface (Q 3 interfaces) in a variety of points of a telecommunications network for its information and management functioning. The network operator has the ability to manage a large number of distributed equipment with a limited number of control units Q 3 interface is a subsystem and provides two functions: - Built-in Q-adapter designed to transcode the messages coming from the TMN operating system in the internal PBX messages back and forth (eg, conversion of MML commands PBX operating system in Q 3 interface format and back). -stek Q 3 protocol, which provides the required connectivity, relevant concept Open Systems Interconnection (OSI).

Figure 7. 3 - The interaction between the telecommunications network and TNM

Alarm digital switching systems

Signalling Principles Alarm - this is a necessary condition for performing their network functions: distribution and delivery of certain messages to the address in compliance with the various requirements of the delivery. Alarm System - a set of signals that provides the interaction of plants and units at various stages of creation and destruction of connecting paths. In other words, the signaling system supports the co-existence of switching nodes and stations in the network to provide customer service functions. A connection path between the terminal subscriber units may be established through one or more of the same type or different types of exchanges that must exchange signals in the establishment and disconnection.

Types of alarm Alarm signals - these signals are viewed as vectors of information relating to a particular channel, a particular input message or network management procedures, they are divided into three types: linear; management; information

Channel associated signaling When the dedicated signaling over the signaling channel signals necessary for operation of any particular channel are transmitted on this channel or via a dedicated channel, which is rigidly fixed to the channel information.

Signalling System 7 (SS 7) - this is such a signaling system in which information management connection establishment (alarm) for all spoken channels and / or data channels is transmitted in the form of data blocks (alarm messages) by one common signaling channel, which can be arranged at any time interval (except zero) of one of the primary paths PCM incoming beam in joining two directly interacting CO

The principle of common channel signaling

SS 7 signaling network Concepts SS 7: - The source and the receiver function of signaling messages subsystem provides the user (User Part - UP); - SP (Signaling Point) signaling point - any signal node implements the signaling message processing functions SS 7, ie the node on which the function subsystem messaging and user subsystems; - A signaling point is uniquely defined by its own unique code (Signaling Point Code); - SL signaling link (Signaling Link) - data link interconnecting signaling points; - Several parallel signaling links directly connecting two signal points form a beam signaling links (Signaling Link Set); - Transit STP (Signaling Transfer Point) signaling point - signaling point carries only signaling message routing between signaling links and has no user subsystems; - Signaling information transmitted between signaling points in the form of a variablelength messages, called signal units. signaling network node can combine the functions of a signaling point and a transit point signaling.

SS 7 signaling network 7 consists of signaling points and connecting them to signaling channels. a signaling point (PS), generally, the switching station that communicates with the adjacent stations using № 7 alarm system. There are terminal and transit substation. Terminal SS, depending on the direction of transmission of the signaling message, may act as outgoing items (Originating Signalling Point - OSP) and destinations (Destination Signalling Point - DSP). World signaling network is divided into two independent levels - international and national. This structure allows you to share the responsibility for signaling network management and create dial plans signaling points of the international network and the different national networks independently. Two signal points have a signal ratio (Signalling Relation - SR), if the user subsystems have the ability to exchange signaling messages. Signal ratio can be carried out directly between the endpoints signaling or via one or more transit points. The specific implementation of a signaling relationship network determines the route signaling Signalling Rout - SR). For one signal ratio can be used multiple signal routes through various transit points. These routes this signal to form a group relationship (beam) signaling routes (Signalling Rout Set - SRS).

Design and technical operation of digital switching systems Design DSC is addressing a number of interrelated tasks: - Preparation of job design, preparation of input data; - Preparation of structural scheme of DSC and schemes of communication; - Calculation of the amount of equipment, the choice of the values of other internal parameters of DSC; - Development of plans for the location of equipment in the DSC avtozale stations and other premises; - Development of cabling schemes; - Preparation of the cross-connect circuits on the intermediate boards, design database of reference information; - Drawing up of specifications, cost estimates and the explanatory note to a set of design documentation.

The main stages of the design, the development of the structural scheme of the station. 1 Development of the block diagram of a switching system designed in accordance with its purpose, types of subscriber access, interoffice signaling types, and others. 2 Calculation of subscriber units of equipment located at the station or remote from it. 3 Calculation of the equipment connecting lines of blocks based on the type of interoffice signaling. 4 Determination of signaling equipment, taking into account the availability of interoffice signaling and telephones with tone dialing DTMF. 5 The calculation of the switching equipment of the field, taking into account the load served and the number of connected linear units. 6 Composition of the control system, as a rule, is already known for each type of CSK, so the design is verified performance of complex control based on the value of the emerging and inter-station loads. 7 Calculation of ACS equipment is carried out based on the number of directions, working with SS 7 signaling and the number of signaling links, interexchange service burden of these areas; 8 The composition and volume of the equipment of the station clock and tone sequences previously determined for each type of CSK. 9 Placing the calculated amount of equipment on standard cabinets, as well as accommodation in the Cabinets of relevant production facilities. 10 Select the type and calculation of power system parameters.

Predicting the number of sources and the intensity of the incoming load. The calculation of the amount of equipment DSC is performed based on the following initial data: - The name of the projected DSC; - Mounted container and structural composition of subscribers; - The number of lines interoffice connections and matrices loads, allows to determine the appropriate bundles interoffice trunks; - The number of lines to communicate with the AMTS and assembly of special services (SSA); - Signaling system used in the interexchange directions.

Features of the technical operation of modern digital switching systems: 1. Operational and maintenance; 2. Maintenance services; 3. Administration. The objective of operational maintenance is to maintain the status of the plant equipment performance through continuous monitoring and evaluation of test results, as well as the replacement of defective boards. For field service includes the following features: - Maintenance work to obtain data characterizing the operation of the station; - Maintenance work on the individual nodes of the station equipment; - Program-production inspections; - The amendment to the operation (perekrocsirovka to change the category of subscribers, the introduction of new services, etc. ). As part of the operation carried out functions such as network-wide redistribution of channels, the development and modernization of stations, replacement of software units (PO), the introduction of additional services (FEB), etc. Under the administrative management understand the functions performed sporadically and associated with radical changes in the technical operation of the process, the need for which is determined on the basis of an analysis of data on the operation of the digital switching systems with PU for a long period. Perform all kinds of technical operation of stations with systems management software provided by software and hardware.

Features of the calculation of the volume of equipment and the number of inter-office communication. With the technical operation of CSK are the requirements for technical characteristics of CSK [11]: preemptive priority service calls; establish connections to networks with bypasses; use of different signaling systems; the introduction of operational management; introduction of control load flows; the ability to output statistics data in the control center; the ability to output data to conduct settlements. Used digital switching system must provide: connection time when long distance 4. . . 17; losses when a connection from subscriber to subscriber (excluding employment callee) for local communication - 3%, while intra-zone communication - 16%, with long-distance communication - 10%. the error rate in the transmission of digital information no more 10ˉ6.

Features of the calculation of the volume of equipment and the number of inter-office communication. The loss must not exceed: connection with intra-0. 02, an outgoing connection 0. 005, when an incoming connection 0. 007, an incoming long-distance connection 0. 002, when connecting to emergency special services 0. 001.

The composition of the equipment and its placement Switching equipment should provide work stations in a synchronous digital network, which uses forced hierarchical synchronization method. switching equipment must have the following sync your device: synchronization via the incoming connection PCM; synchronization from an external reference signal. switching equipment used at the top level network must include PEG, corresponding to the requirements of Recommendation G. 811, G. 703 ITU-T

Digital switching system

SI 2000 system is characterized by the following properties: - Modular design of hardware and software; - Digital switching for transmitting a call, data, control signals, acoustic and speech signals; - Compatibility with existing digital and analog telephone exchanges; - Uniform design and technological solutions, unified electronic components and materials for all means of switching equipment; - A unified system of technical operation, using the technical operation centers (TSTE); - Full compliance with the standards and recommendations of international regulatory bodies (ITU-T, ETSI, ECMA) and the specifications for the national network of the Republic of Kazakhstan.

SI 2000 switching systems structure In accordance with the recommendation ITU-T Q. 512, SI 2000 system is functionally divided into a switching node (Switch Node) and the peripheral APs (Access Node). To manage all nodes in the system developed a universal control unit (Management Node). Switching Node - SN, it is used to connect the trunk and management of telecommunication services access points, as well as the implementation of the management and maintenance functions. System and application software node switching is performed in real time and ensure the provision of telecommunications services, as well as administrative functions, generating statistics and tariff information, maintenance and monitoring of emergencies, SORM functions. Group is used as the switching stage. Can be used as the formation of the CO medium capacity (up to 40, 000 ports), and as an independent transit hub. Hardware unit represented ISA module.

SI 2000 switching systems structure For SI 2000 switching systems in the PSTN network has the following interfaces: - A digital network interface with SS 7 signaling (subsystems MTP, ISUP and SCCP). Compliance with Recommendation ITU-T and the specifications for the national network of Russia; - Digital network interfaces with the procedure caller ID and alarm in one or two isolated signal channels (urban and rural universal) with the transfer of ten-day source of control signals (SL, SLM, NLB line), by IBSC-shuttle (SL, SLM line) or pulse packet (NLB line). Comply with the specifications for the national network of Russia. In addition, switching node has the following interfaces: - Interface for connecting the control unit; - The ETHERNET interface type - for the local connection of the control unit; - Interface for remote control units via PPP channel organization in the flow of 2 Mbit / s; - Interface for remote management of SORM.