Special Effects SPECIAL EFFECT IF 1108 73 IF

Special Effects

SPECIAL EFFECT IF 1108/73 IF 1109/34 IF 1110/60 IF 0501/00 IF 1111/00 IFL 3335/08 IFL 3335/04 IFO 3409/36 IFO 3431/13 IFL 3558/19 IF 0425/36 IF 0425/34 -35 LAMINA SAYERGUM SAYERGHOST FLUORESCENT STEEL CEMENT RUSTY OX COPPER OX BRASS

LAMINA NOBEL METAL üIF 1108/73 üIF 1109/34 üIF 1110/60 LAMINA SILVER LAMINA GOLD LAMINA COPPER

LAMINA (ANODIZED METAL) NOBEL METAL IF 1108/73 - IF 1109/34 - IF 1110/60 ü To introduce in acrylic binder ü Suggested quantity 10% (5 -20% ) ü Possible to mix by TP 2009/XX or. TPL 3325/XX (attention to color: silver could mixed to any , copper only to similar color gold is between the two) ü ü Hardener TH 790 30% Thinner DT 436 30 % Difficult to spray Attention for the drying

TECHNICAL DATA IF 1108/73 IF 1109/34 IF 1110/60 üFlash off üDust free üTouch dry üDrying time in owen 10 -15 minuti a 25°C 20 -30 minuti a 25°C 1 -2 ore a 25°C 30 -40 minuti a 60 -80°C üSolid Content 33± 2 üPecific gravity 1. 22± 0. 03 üSuggested nozzle 1, 5 - 1, 8 mm üSuggested application air pressure 3 - 3, 5 Atm üPot life 3 hours üTheoric yeld 3 -4 m 2/kg

COATING SYSTEM APPLICATION AT 20°C ü Applying SAYERGRIP white PU IF 1112/N 0 ü After 2 but not over 24 hours at 20 -25°C apply LAMINA colours APPLICATION IN OVEN (60 -80°C) ü Applying SAYERGRIP white PU IF 1112/N 0 ü After 30 min at 60 -80°C apply LAMINA SKILNESS: ü Basecoat MUST be white ü The application must be wet homogeneous avoiding thick layers ü The product have a good adhesion on most common plastics such as ABS, ABS-PC

SAYERGUM IF 0501/00 ü ü On PU pigmented topcoat Hardener TH 790 30% Thinner DT 436 30 % Easy to spray

TECHNICAL DATA üFlash off üDust free üTouch dry in oven üGloss level IF 501 10 -15 min at 20°C 2 hour at 20°C 24 hours at 20°C 60 -90 min at 60 -80°C 1 -3 gloss üSolid Content 31± 2 üPecific gravity 1. 22± 0. 03 üSuggested nozzle 1, 5 - 1, 8 mm üSuggested application air pressure 3 - 3, 5 Atm üPot life 2 hours üSuggested quantity 100 -140 g/m 2 üTheoric yeld 6 -8 m 2/kg

COATING SYSTEM SAYERGUM APPLICATION AT 20°C ü Applying SAYERGRIP PU IF 1112/N 0 (colours required) ü After 2 but not over 12 hours at 20 -25°C APPLICATION IN OVEN (60 -80°C) ü Applying SAYERGRIP PU IF 1112/N 0 (colours required) ü After 30 minuti circa a 60 -80°C aapply SAYERGUM SKILNESS: ü Basecoat must be colored ü The application must be wet homogeneous avoiding thick layers ü The effect must be achieved in one time through cross application

SAYERGHOST IF 1111/00 -Photoluminescent ü ü ü Apply on white PU Sayergrip Hardener TH 790 30% Thinner DT 436 30 % Is not suitable for exterior use Possible to protect with TU 74 XX

COATING SYSTEM SAYERGHOST APPLICATION AT 20°C ü Applying SAYERGRIP PU IF 1112/N 0 (colours required) ü After 2 but not over 6 hours at 20 -25°C apply SAYERGHOST APPLICATION IN OVEN (60 -80°C) ü Applying SAYERGRIP PU IF 1112/N 0 (colour srequired) ü After 30 minuti circa a 60 -80°C aapply SAYERGHOST SKILLNESS ü As it is clear the basecoat more is evident the effect; the maximum effect is achieved on white basecoat ü To increase the effect is possible apply two coats after 30 min at 20°C ü The product have a good adhesion on most common plastics such as ABS, ABS-PC

TECHNICAL DATA üFlash off üDust free üTouch dry in oven IF 1111/00 10 -15 min at 20°C 30 -40 min at 20°C 2 hours at 20°C 60 min at 60 -80°C üSolid Content 49± 2 üPecific gravity 1. 46± 0. 03 üSuggested nozzle 1, 5 - 1, 8 mm üSuggested application air pressure 3 - 3, 5 Atm üPot life 3 hours üSuggested quantity 100 -140 g/m 2 üTheoric yeld 3 -4 m 2/kg

FLUORESCENT IFL 3335/08 -04 ü ü ü Apply on white PU Sayergrip IF 1112/N 0 Hardener TH 3354 20% Thinner DT 436 30 % No need to be overcoated Is not suitable for exterior use

TECHNICAL DATA üFlash off üDust free üTouch dry in oven IFL 3335/04 -08 10 -15 min at 20°C 30 -40 min at 20°C 2 hours at 20°C 50 - 60 min at 60 -80°C üSuggested nozzle 1, 5 - 1, 8 mm üSuggested application air pressure 3 - 3, 5 Atm üPot life 3 hours üSuggested quantity 100 -140 g/m 2 üTheoric yeld 3 -4 m 2/kg

COATING SYSTEM FLUORESCENT APPLICATION AT 20°C ü Applying SAYERGRIP PU IF 1112/N 0 (colours required) ü After 2 but not over 6 hours at 20 -25°C apply FLUORESCENT APPLICATION IN OVEN (60 -80°C) ü Applying SAYERGRIP PU IF 1112/N 0 (colour srequired) ü After 30 minuti circa a 60 -80°C aapply FLUORESCENT SKILLNESS ü As it is clear the basecoat more is evident the effect; the maximum effect is achieved on white basecoat ü To increase the effect is possible apply two coats after 30 min at 20°C ü The product have a good adhesion on most common plastics such as ABS, ABS-PC

STEEL IFO 3409/36 ü It's a very shine metallic effect, ü Mix with DT 1150, DT 0013 or DT 0015 50 -70% minimun ü Possible to mix with XM 7100/XX or TP 2009/XX to achieve different colour

TECHNICAL DATA üFlash off üDust free üTouch dry üDrying time in owen IFO 3409/36 10 minuti a 25°C 20 minuti a 25°C 1 -2 ore a 25°C 20 minuti a 60 -80°C üSolid Content 30± 2 üPecific gravity 0. 997± 0. 03 üSuggested nozzle 1, 5 - 1, 8 mm üSuggested application air pressure 3 Atm üPot life illimited üTheoric yeld 6 -8 m 2/kg

COATING SYSTEM STEEL APPLICATION AT 20°C ü Applying PU-AC-PE-NC-WB basecoat ü After 4 -6 2 hours at 20 -25°C without sand apply STEEL SKILLNESS ü Apply the product shading in multiple steps, without get wet ü The final aesthetic effect of metallization is closely linked to the manuality

CEMENT IFO 3431/13 ü Ready to use, possible to dilute with water ü Compatible with XA 2006/XX and AC 0600/XX Application by: ü Roller ü different spatula type ü Possible overcoat with Wb or SB matt top coat

TECHNICAL DATA IFO 3431/13 üFlash off üDust free üTouch dry in oven 5 min at 20°C 10 min at 20°C 1 hours at 20°C 20 min at 60 -80°C üSolid content üSpecific gravity üPot life üSuggested quantity üTheoric yeld 80± 2 1, 70± 0. 30 illimited 100 -200 g/m 2 6 -8 m 2/kg

COATING SYSTEM CEMENT APPLICATION AT 20°C ü Applying directly on bare wood ü After 24 hours at 20 -25°C sand apply SB or WB topcoat SKILLNESS ü It can be applied in big amount by spray, spray plus sponge, by spatula or by roller. ü The final aesthetic effect is closely linked to the manuality

RUSTY IFL 3558/19 +IFL 3570/00 + IFL 3559/00 ü It is 3 steps effect ü Give to the wood metal oxidation effect

TECHNICAL DATA ü ü Flash off Dust free Touch dry in oven RUSTY 10 -15 min at 20°C 30 min at 20°C 1 hours at 20°C 20 min at 60 -80°C IFL 3558/19 ü ü ü Solid content Specific gravity Pot life Suggested quantity Theoric yeld 69± 2 1, 86± 0. 30 2 hour at 20°C IFL 3570/00 IFL 3559/00 10 ± 2 11 ± 2 1. 03± 0. 30 0. 89± 0. 30 illimited 150 -200 g/m 2 50 -60 g/m 2 3 -4 m 2/kg 15 -20 m 2/lt

COATING SYSTEM RUSTY APPLICATION AT 20°C ü Apply PU or PE basecoat, white preferable ü After 12 hour sand apply metal effect IFL 3558/19 (TH 790 20% DT 1150 30 %) ü After 24 hours sand apply IFL 3570/00 (reactive) ü After 24 h apply IFL 3559/00 (protective); 2 -3 coat are raccomanded ü After 6 hour without sanding apply acrylic topcoat (TU 74 or TZ 70 or TZ 13 or TZ 93) SKILLNESS ü The reaction depend from the quantity of reactive product applied. ü The final aesthetic effect is closely linked to the manuality

MAGNETIC IFL 3558/19 ü It is very easy effect

TECHNICAL DATA MAGNETIC ü ü Flash off Dust free Touch dry in oven 10 -15 min at 20°C 30 min at 20°C 1 hours at 20°C 20 min at 60 -80°C ü ü ü Solid content Specific gravity Pot life Suggested quantity Theoric yeld 69± 2 1, 86± 0. 30 2 hour at 20°C 150 -200 g/m 2 3 -4 m 2/kg

COATING SYSTEM MAGNETIC APPLICATION AT 20°C ü Apply PU or PE basecoat, white preferable ü After 12 hour sand apply metal effect IFL 3558/19 (TH 790 20% DT 1150 30 %) 2 -3 coat wet on wet SKILLNESS ü The magnetic effect increase with quantity applied. ü It is possible add TP 2009/22 to achive blackboard colour ü The final aesthetic effect is closely linked to the manuality

OXIDIZED COPPER IF 0425/36 ü It is 3 steps effect ü Give to the wood metal oxidation effect

TECHNICAL DATA ü ü Flash off Dust free Touch dry in oven COPPER 10 -15 min at 20°C 30 min at 20°C 1 hours at 20°C 20 min at 60 -80°C IF 0425/36 ü ü ü Solid content Specific gravity Pot life Suggested quantity Theoric yeld IFL 3570/00 IFL 3559/00 8± 1 10 ± 2 0. 93± 0. 30 1. 03± 0. 30 0. 89± 0. 30 illimited 11 ± 2 100 -150 g/m 2 50 -60 g/m 2 3 -4 m 2/kg 15 -20 m 2/lt

COATING SYSTEM COPPER APPLICATION AT 20°C Apply PU or PE basecoat, white preferable After 12 hour sand apply metal effect IF 0425/36 (ready to use) After 24 hours sand apply IFL 3570/00 (reactive) After 24 h apply IFL 3559/00 (protective); 2 -3 coat are raccomanded After 6 hour without sanding apply acrylic topcoat (TU 74 or TZ 70 or TZ 13 or TZ 93) SKILLNESS ü The reaction depend from the quantity of reactive product applied. ü The final aesthetic effect is closely linked to the manuality ü ü ü

OXIDIZED BRASS IF 0425/34 or 35 ü It is 3 steps effect ü Give to the wood metal oxidation effect

TECHNICAL DATA ü ü Flash off Dust free Touch dry in oven BRASS 10 -15 min at 20°C 30 min at 20°C 1 hours at 20°C 20 min at 60 -80°C IF 0425/34 -35 IFL 3570/00 IFL 3559/00 ü ü ü Solid content Specific gravity Pot life Suggested quantity Theoric yeld 24± 2 10 ± 2 1. 10± 0. 30 1. 03± 0. 30 0. 89± 0. 30 illimited 11 ± 2 100 -150 g/m 2 50 -60 g/m 2 3 -4 m 2/kg 15 -20 m 2/lt

COATING SYSTEM BRASS APPLICATION AT 20°C ü Apply PU or PE basecoat, white preferable ü After 12 hour sand apply metal effect IF 0425/34 -35 (ready to use) ü After 24 hours sand apply IFL 3570/00 (reactive) ü After 24 h apply IFL 3559/00 (protective); 2 -3 coat are raccomanded ü After 6 hour without sanding apply acrylic topcoat (TU 74 or TZ 70 or TZ 13 or TZ 93) SKILLNESS ü The reaction depend from the quantity of reactive product applied. ü The final aesthetic effect is closely linked to the manuality

RAL Metallic Formulas

3 ACRYLIC CONVERTERS ü TZL 3577/73 ü TZL 3578/73 ü TZL 3579/73 Medium grain silver Texture medium grain silve Fine grain silver

12 PIGMENTED PASTAS ü TP 2009/BB ü TP 2009/06 ü TP 2009/08 ü TP 2009/09 ü TP 2009/17 ü TP 2009/21 ü TP 2009/26 ü TP 2009/52 ü TP 2009/53 ü TP 2009/61 ü TP 2009/72

BB 06 08 1035 09 17 21 72 TZL Tot 0, 25 2, 35 26 42 52 53 61 0, 6 96, 8 100 1036 5, 71 0, 37 0, 42 93, 5 100 2013 3, 68 5, 52 0, 48 90, 36 100 3032 2, 9 0, 68 86, 28 100 3033 3, 75 91, 8 100 97, 6 100 1, 2 94, 3 100 0, 52 90, 43 100 0, 89 84, 44 100 0, 83 85 100 0, 51 91, 2 100 0, 82 96, 65 100 0, 62 85, 38 100 9022 0, 61 99, 39 100 9023 1, 55 98, 45 100 0, 31 99, 63 100 1, 6 98, 4 100 10, 14 1, 22 3, 23 4011 2, 4 4012 4, 5 5025 8, 7 5028 0, 35 8. 89 5, 78 6035 5, 83 8, 34 6036 7, 26 7048 8029 9006 9007 2, 29 10, 18 0, 24 3, 82 0, 06 1, 03

TO ACHIEVE VERY BRIGHT COLOUR USE: ü TPL 3325/XX

ELEVEN COLOURS AVAILABLE

RAINBOWED: PIGMENT DISPERSIONS FOR METALIZED EFFECTS ü 04 yellow ü 06 blue ü 08 red ü 13 white ü 16 blue ü 22 black ü 24 scarlet ü 42 green ü 53 magenta ü 61 violet ü 90 brown

THANK YOU for ATTENTION