PPPo A Test Configuration Example on IDL-4800 to

PPPo. A Test Configuration Example on IDL-4800 to ADE-4400 / 3 rd party device

PPPo. A Test Configuration Uplink BP: x. DSL-1, PVC-1: VLAN-2, tagged IF PVID-2, Untagged PPP server Untagged IF VLAN-2 tagged IF PVID-2 ASUS AM_604 g PPPo. A connection enabled DHCP Server enabled PC#1 ADE-4400 PPPo. A connection enabled DHCP Server enabled IP: Dynamic IP 2

PPPo. A Test Configuration Modem PPPo. E/PPPo. A Server IP DSLAM L 2 Switch PPPo. E / PPPo. A server Ubuntu + PPPo. E server IP DSLAM IDL-4800 Modem ADSL CPE Modem 3

Steps for the PPPo. A test 1. Make sure your PPP service on the Server is running. 2. Configures DSLAM to have a proper setting. 3. Configures the ADSL Modem (ex: ADE-4400 & ASUS AM_604 g) 4. Configures your switch and make sure all VLAN setting is correct. 5. Verify traffic path of PPPo. A connection. 4

DSLAM configuration 5

IDL-4800 DSLAM running config management mgmt 172. 16. 9. 44 netmask 255. 0 management gbe 192. 168. 100. 1 netmask 255. 0 route default 172. 16. 9. 254 snmp 1 community rw "public" igmp version v 2 igmp snooping interface gigabit 1 bridge default vlan 1 egress untag vlan 2 priority reserved tag isolation interface gigabit 2 bridge default vlan 1 egress untag interface xdsl 1 adsl-config line status service on bridge 1 pvc 0/35 pvc encapsulation auto default vlan 2 egress untag interface xdsl 2 adsl-config line status service on bridge 1 pvc 0/35 pvc encapsulation auto default vlan 2 egress untag cluster-cfg name "u 71577 C" bye < running config > 6

IDL-4800 DSLAM running config Note: For the PPPo. A application , please configure ADSL PVC encapsulation mode as “Auto” 7

Example device: PLANET ADE-4400 configuration 8

Configuration on PLANET ADE-4400 1. Click Network WAN 2. Key in the parameters VPI: 0 VCI: 35 according to DSLAM’s setting 3. Select VC-Mux (or LLC) for encapsulation 4. Select PPPo. A 5. Enable NAPT 6. Key in User Name / Password 7. And then ADD to add the channel 8. Save the Configuration 9

Example device: ASUS AM_604 g configuration 10

Configuration on ASUS AM_604 g 1. Click Advanced Setup WAN 2. Click Add Button 11

Configuration on ASUS AM_604 g (Cont. ) Input your VPI and VCI number 12

Configuration on ASUS AM_604 g (Cont. ) Select connection type and encapsulation mode VCMUX or LLC for PPPo. A 13

Configuration on ASUS AM_604 g (Cont. ) 1. Input your PPP Username and Password for PPPo. A connection 2. Click Next Button 14

Configuration on ASUS AM_604 g (Cont. ) 15

Configuration on ASUS AM_604 g (Cont. ) Click Save Button 16

Configuration on ASUS AM_604 g (Cont. ) Click Finish button 17

Configuration on ASUS AM_604 g (Cont. ) 1. Click Advance Setup Routing Default Gateway 2. Select Enable Automatic Assigned Default Gateway check box 3. Click Save/Apply button 18

Configuration on ASUS AM_604 g (Cont. ) 1. Click Advance Setup LAN 2. Select Enable DHCP Server check box 3. Click Save/Reboot button Save/ Reboot 19

PPPo. A Status on ASUS AM_604 g If PPPo. A works and all the settings of PPP server, DSLAM, and CPE are correct, the WAN Info of CPE will show status is ‘Up’ and PPP server will assign an IP to this CPE. 20

Verify traffic path of PPPo. A connection 21

PPPo. A Verification Uplink BP: x. DSL-1, PVC-1: VLAN-2, tagged IF PVID-2, Untagged PPP server Untagged IF VLAN-2 tagged IF PVID-2 ASUS AM_604 g PPPo. A connection enabled DHCP Server enabled PC#1 PC#2 ADE-4400 PPPo. A connection enabled DHCP Server enabled IP: Dynamic IP After PPP session is established, PC#1 can access the same LAN (PC#2) as PPP server and internet (WAN, depends on PPP server setting. ) for testing. 22

23