LG PLC Smart I O LG Industrial Systems 1

LG PLC Smart I/O LG Industrial Systems 1 LG PLC

LG Smart I/O is: Open-type remote I/O module, connected with a field network, for real-time controlling I/O modules distributed in a field Compact ü Compact design supporting DIN Rail Flexible ü Supporting four field networks (Rnet/Profibus-DP/Device. Net/Modbus) ü Having various I/O modules (16/32 points, DC/Relay/TR type) ü Available to systematise other devices in various ways Easy ü Setting parameters easily using dedicated configurator (Sycon) or GMWIN/KGLWIN without additional programming (Rnet/Profibus-DP/Device. Net) ü Simplification of a program (Modbus) through the LGIS FB (command) 2 LG PLC

LG Smart I/O 1. Compact Size A (Length) B (Width) C (Depth) 16 -point I/O 115 mm 50 mm 39 mm 32 -point I/O 176 mm 50 mm 39 mm 16 -point Module 32 -point Module 3 LG PLC

LG Smart I/O 2. Four Field Networks Support Item Rnet Profibus-DP Device. Net Modbus Protocol LGIS Dedicated Rnet Protocol (Fnet for Remote) Profibus-DP (RS-485/EN 50170) Device. Net (CAN) Modbus (RS-422) Transmission speed 1 Mbps 9. 6 kbps~12 Mbps 125/250/500 kbps 2. 4 kbps~38. 4 kbps Transmission Distance 750 m/segment 100 m~1. 2 km 500/250/125 m (Thin cable: 100 m) 500 m Topology BUS Trunk & Drop BUS Transmission Method Token pass & Broadcast Token pass & Master/Slave (Poll) CSMA/NBA (Poll Cyclic, COS, Strobe) Master/Slave (Poll) Max. number of stations 32 sta. /segment (in 32 sta. /out 32 sta. ) 32 sta. /segment (sta. #: 1~99) 64 stations 32 stations Link Capacity 2, 048 pt. /master (64 sta. * 32 pt. ) 1 K/master: -PUEA 7 K/master: -PUEB 2, 048 pt. /Master 64 pt. /station 4 LG PLC

LG Smart I/O ♣ Field Network Application Overview AB (Rockwell) -dominated Device. Net applied in the U. S. and Siemens-dominated Profibus-DP standardised in Europe are a new trend U. S. Europe * The above is the relative data based on the VDC document. * Dedicated network systems are not included. : Network supporting LGIS Remote 5 LG PLC

LG Smart I/O 3. Various I/O Modules (24 types in total) Input Items Output DC (Sink/Source) Points 16 32 TR (Sink) 16 Mixed Input/Output Relay 32 DC (Sink/Source) TR (Sink) 16 16 16 Rated Input (Load Voltage) DC 24 V/ AC 110 V/ 220 V DC 24 V Rated Input Current (Load Current) 7 m. A 0. 1 A/2 A 2 A/5 A 7 m. A 0. 1 A/2 A Off/On Under 3 ms Under 0. 5 ms Under 10 ms Under 3 ms Under 0. 5 ms On/Off Under 3 ms Under 10 ms Under 3 ms Under 1 ms 16 points/COM 8 points/COM 16 pt. /COM 35 m. A 30 m. A Response Time Common (point/COM) Current Consumption Supporting Network & Part Number 35 m. A 40 m. A 30 m. A 65 m. A 400 m. A Rnet GRL-D 22 A GRL-D 24 A GRL-TR 2 A GRL-TR 4 A GRL-RY 2 A GRL-DT 4 A Profibus GPL-D 22 A GPL-D 24 A GPL-TR 2 A GPL-TR 4 A GPL-RY 2 A GPL-DT 4 A Device. Net GDL-D 22 A GDL-D 24 A GDL-TR 2 A GDL-TR 4 A GDL-RY 2 A GDL-DT 4 A Modbus GSL-D 22 A GSL-D 24 A GSL-TR 2 A GSL-TR 4 A GSL-RY 2 A GSL-DT 4 A 6 LG PLC

LG Smart I/O 4. System Configuration - Flexible ü LG PLC Interface I/O I/O RUEA GM 6, k 200 S #3 Smart I/O I/O CUEA CPU POWER G 6 L-RUEA CPU Master Module Remote I/O GMR/1/2/3 G 3 L-CUEA GM 4 #2 Smart I/O G 4 L-RUEA GRL-D 22 A GRL-D 24 A GRL-TR 2 A GRL-TR 4 A GRL-RY 2 A GRL-DT 4 A G 4 L-CUEA G 6 L-CUEC GSL-D 22 A GSL-D 24 A GSL-TR 2 A GSL-TR 4 A GSL-RY 2 A GSL-DT 4 A GM 7, K 80 S #1 Smart I/O G 3 L-RUEA GM 4, K 300 S RNET (1 Mbps, Twisted Pair) Remote I/O GM 3, K 1000 S GLOFA/Master-K (Master) Master Module GM 6 CPU POWER CPU G 7 L-CUEC #N Smart I/O GM 7/K 80 S (Master국) GLOFA-GM (Master) Modbus (RS-422, Max 38. 4 kbps) #1 Smart I/O #2 Smart I/O #3 Smart I/O #N Smart I/O 7 LG PLC

LG Smart I/O ü LG PLC Interface I/O I/O PUEA CPU GM 6 #3 Smart I/O I/O DUEA CPU POWER G 6 L-PUEA/B Master Module Remote I/O GM 3, K 1000 S G 3 L-DUEA GM 4, K 300 S #2 Smart I/O G 4 L-PUEA/B GPL-D 22 A GPL-D 24 A GPL-TR 2 A GPL-TR 4 A GPL-RY 2 A GPL-DT 4 A G 4 L-DUEA GM 6 #1 Smart I/O G 3 L-PUEA/B GM 4, K 300 S Profibus-DP (Max 12 Mbps) Remote I/O GM 3, K 1000 S GLOFA/Master-K (Master) Master Module CPU POWER CPU G 6 L-DUEA GDL-D 22 A GDL-D 24 A GDL-TR 2 A GDL-TR 4 A GDL-RY 2 A GDL-DT 4 A #N Smart I/O GLOFA/Master-K (Master) Device. Net (Max 500 kbps) #1 Smart I/O #2 Smart I/O #3 Smart I/O #N Smart I/O 8 LG PLC

LG Smart I/O ü Interface with other PLCs Maker S 7 -315 -2 DP (built-in) S 7 -413 -2 DP (built-in) S 7 -300 (CP 342 -5) S 7 -400 (CP 443 -5), etc Mitsuishi Q (QJ 71 PB 92 D) An. A/An. U (AJ 71 PB 92 D) An. S (A 1 SJ 71 PD 92 D) GPL-D 22 A GPL-D 24 A GPL-TR 2 A GPL-TR 4 A GPL-RY 2 A GPL-DT 4 A Omron Profibus-DP (Max 12 Mbps) Remote I/O Siemens Other PLC (Master) CPU (Master Module) C 200 H/CS 1 (C 200 HW-PRM 21), etc Other PLCs available #1 Smart I/O #2 Smart I/O #3 Smart I/O #N Smart I/O CPU (Master Module) Remote I/O Rockwell SLC 500 (1747 -SDN/B) Control. Logix (1756 -DNB) Mitsuishi Q (QJ 71 DN 91) An. A/An. U (AJ 71 DN 91) An. S (A 1 SJ 71 DN 91) GDL-D 22 A GDL-D 24 A GDL-TR 2 A GDL-TR 4 A GDL-RY 2 A GDL-DT 4 A Omron Other PLC (Master) Maker C 200 H/CS 1 (C 200 HW-DRM 21) CQM 1 (CQM 1 -DRT 21) Device. Net (Max 500 kbps) #1 Smart I/O #2 Smart I/O #3 Smart I/O #N Smart I/O 9 Other PLCs available LG PLC

LG Smart I/O ü Interface with other PLCs Maker CPU (Master Module) Remote I/O Schneider Modicon Series Telemechanic Series Squae D Series Mitsuishi An. A/An. U (AJ 71 UC 24 S 2) An. S (A 1 SJ 71 UC 24 -S 2) GSL-D 22 A GSL-D 24 A GSL-TR 2 A GSL-TR 4 A GSL-RY 2 A GSL-DT 4 A Other PLC (Master) Modbus (RS-422, Max 38. 4 kbps) Other PLCs available #1 Smart I/O #2 Smart I/O #3 Smart I/O #N Smart I/O 10 LG PLC

LG Smart I/O ü PC Interface Maker - PC Application PC Board Remote I/O General RS-422 Board GSL-D 22 A GSL-D 24 A GSL-TR 2 A GSL-TR 4 A GSL-RY 2 A GSL-DT 4 A Others available Modbus (RS-422, Max 38. 4 kbps) #1 Smart I/O #2 Smart I/O #3 Smart I/O #N Smart I/O 11 LG PLC

LG Smart I/O ü PC Interface Maker CP 5614 FO PCI Softing Profi Board for PCI Com. Soft Profibus-DP (Max 12 Mbps) Remote I/O Siemens PC Application PC Board DF PROFI PCI GPL-D 22 A GPL-D 24 A GPL-TR 2 A GPL-TR 4 A GPL-RY 2 A GPL-DT 4 A Others available #1 Smart I/O #2 Smart I/O #3 Smart I/O #N Smart I/O Maker 1784 -PCID (S) Hilscher CIF 50 -DNM Beckhoff Device. Net (Max 500 kbps) Remote I/O Rockwell PC Application PC Board FC 5201 GDL-D 22 A GDL-D 24 A GDL-TR 2 A GDL-TR 4 A GDL-RY 2 A GDL-DT 4 A Others available #1 Smart I/O #2 Smart I/O #3 Smart I/O #N Smart I/O 12 LG PLC

LG Smart I/O Device comparison - DC input module LGIS (Smart I/O) AB (Compact Block) Mitsubishi Omron Part Number G□L-D 22 A (16 P) G□L-D 24 A (32 P) 1791 D-16 B 0 AJ 65 SBTB 1 -16 D AJ 65 SBTB 1 -32 D DRT 1 -ID 08(-1) DRT 1 -ID 16(-1) Point 16 / 32 16 16 / 32 8 / 16 Type Sink / Source Rated Input DC 24 V Rated Input Current 7 m. A 2~11 m. A 7 m. A 10 m. A Operation Voltage On More than 19 V More than 10 V More than 14 V More than 15 V Off Under 6 V Under 5 V Response Time Off/On Under 3 ms 1~32 ms setting Under 1. 5 ms Under 3 ms On/Off Under 3 ms 1~32 ms setting Under 1. 5 ms Under 3 ms Connection Terminal block Common 16/com 8/com 16 or 32/com 8 or 16/com Size 116 * 51 * 40 (16 P) 184 * 51 * 40 (32 P) 148 * 38 118 * 50 * 40 (16 P) 179 * 50 * 40 (32 P) 125 * 50 * 40 (8 P) 150 * 40 (16 P) Support Network Device. Net ● ● × ● Profibus ● × × × Modbus ● × × × CC-Link × × ● × 13 LG PLC

LG Smart I/O Device comparison – Tr Output module LGIS (Smart I/O) AB (Compact Block) Mitsubishi Omron Part Number G□L-TR 2 A G□L-TR 4 A 1791 D-0 B 16 P AJ 65 SBTB 1 -16 T AJ 65 SBTB 1 -32 T DRT 1 -OD 08(-1) DRT 1 -OD 16(-1) Point 16 / 32 16 16 / 32 8 / 16 Type Sink / Source Sink Rated Input DC 24 V DC 12/24 V Rated Input Current 0. 1 A / 2 A*1 0. 5 A / 4 A 0. 5 A / 3. 6 A (16 P) 0. 5 A / 4. 8 A (32 P) 0. 3 A Response Time Off/On Under 0. 5 ms - On/Off Under 1 ms Under 1. 5 ms - Connection Terminal block Common 16/com 8/com 16 or 32/com 8 or 16/com Size 116 * 51 * 40 (16 P) 184 * 51 * 40 (32 P) 148 * 38 (16 P) 118 * 50 * 40 (16 P) 179 * 50 * 40 (32 P) 125 * 50 * 40 (8 P) 150 * 40 (16 P) Support Network Device. Net ● ● × ● Profibus ● × × × Modbus ● × × × CC-Link × × ● × *1 Support afterward: 0. 5 A/4 A (May, 2003) 14 LG PLC

LG Smart I/O Device comparison - Relay Output module LGIS (Smart I/O) AB (Compact Block) Mitsubishi Omron Part Number G□L-RY 2 A - AJ 65 SBTB 2 -8 R GT 1 -ROP 16 Point 16 - 8 16 Type Relay - Relay Rated Input DC 24 V/AC 240 V - DC 12/240 V DC 24 V/AC 240 V Rated Input Current 2 A / 5 A - 2 A / 4 A 2 A Response Time Off/On Under 10 ms - Under 10 ms On/Off Under 10 ms - Under 12 ms Connection Terminal block - Terminal block Common 8/com - 8/com 16/com Size 184 * 51 * 40 - 118 * 50 * 40 160 * 50 Device. Net ● - × ● Profibus ● - × × Modbus ● - × × CC-Link × - ● × Support Network 15 LG PLC

LG PLC APM Advanced Position Module LG Industrial Systems 16 LG PLC

APM (Advanced Position Module) 1. Features ü LGIS ASIC-embedded processor for APM ü 3 -axis linear/2 -axis arc interpolation operation ü Simultaneous/synchronous/separate operation ü Parameter setting with mm, inch, degree, and pulse unit ü Parameter, position data change by external device or program 3 -axis APM module ü Direct Start by external input signal (without program) LGIS ASIC 17 LG PLC

APM (Advanced Position Module) 2. Specifications ( I ) Item K 300 S (GM 4) G 4 F-PP 1 / 2 / 3 O G 4 F-PP 1 / 2 / 3 D K 200 S (GM 6) G 6 F-PP 1 / 2 / 3 O G 6 F-PP 1 / 2 / 3 D Open Collector Differential Output type No. of axes 1, 2, 3 Positioning data 400 step/axis Unit mm, inch, degree, pulse Pos. address range -2, 147, 483, 648 ~ +2, 147, 483, 647 Max. output pulse Differential output: 1 Mpps Open Collector output: 200 kpps Data back-up Flash memory Origin point return Near-zero point dog, Z phase, upper/lower limit switch Speed range 0. 1 ~ 1200. 00 / 6000. 00 (mm/min) 0. 01 ~ 120. 000 / 600. 000 (inch/min) 0. 01 ~ 120. 000 / 600. 000 (degree/min) 1 ~ 200000 / 1000000 (pulse/s) 18 LG PLC

APM (Advanced Position Module) 2. Specifications ( II ) K 300 S (GM 4) G 4 F-PP 1 / 2 / 3 O G 4 F-PP 1 / 2 / 3 D K 200 S (GM 6) Item G 6 F-PP 1 / 2 / 3 O G 6 F-PP 1 / 2 / 3 D Interpolation Max. 3 -axis linear/2 -axis arc interpolation Control method Position, speed, position/speed, speed/position, PTP Acc/Dec pattern Trapezoidal & S curve Acc/Dec time 4 -type Acc/Dec pattern selection available Ext. command signal JOG For/Rev Signal / Automatic Operation / Simultaneous Start / Emergency Stop / Speed Position Conversion Operation indication 17 segment indicator, LED Max. installation Without limit (main and extension base) I/O occupation point 32 point (MASTER-K series only) Connector 40 -pin connector 19 LG PLC

APM (Advanced Position Module) ü 3 -axis linear interpolation - 3 -axis linear interpolation control moves an object to its corresponding point in space Z X Y 20 LG PLC

APM (Advanced Position Module) ü 2 -axis circular interpolation - 2 -axis circular interpolation moves an object to its corresponding point on the circle Y Start Point (CW) -Easy to manufacture an object like fan shape, oval, etc End Point X 21 LG PLC

APM (Advanced Position Module) ü 3 -axis simultaneous operation - With one start command, each axis starts its operation simultaneously - 3 -axis simultaneous pulse output Speed Command Time X Time Y Time Z Time 22 LG PLC

APM (Advanced Position Module) ü Synchronous operation (by Speed) - Axis synchronous selection by internal/external signal (Synchronous speed ratio) - Application to its subordinate axis for the main axis speed ratio Speed Main Axis Time Sub Axis Time 23 LG PLC

APM (Advanced Position Module) ü Synchronous operation (by Position) - Axis synchronous selection by internal/external signal (Synchronous start by the absolute position of the main axis) Speed - Synchronous start of the subordinate axis by the current position of the main axis Main axis Time Absolute position of main axis Sub axis 24 Time LG PLC

APM (Advanced Position Module) ü Position Speed Override - Speed change during position operation available by Speed Override command - Temporary operation speed change available Speed Time 1 st 2 nd 3 rd 25 LG PLC

APM (Advanced Position Module) ü Position Override - Position Override to the changed position during position operation - Temporary goal position change available during position operation Speed Time Goal position before change 26 Goal position after change LG PLC

APM (Advanced Position Module) ü Acceleration / Deceleration Profile - Trapezoidal & S-curve Acceleration/Deceleration (automatic detection of deceleration point) Speed -Smooth Motor Control (Acc/Dec) Time S-curve Acc/Dec Trapezoidal Acc/Dec 27 LG PLC

APM (Advanced Position Module) ü External Start -Fast control and Easy use thanks to External Start External Signal Types Signal Delay Element Internal Start (Function Block) JOG Forward/Reverse Delay time = D/I filtering + Program Scan time + FB processing + function processing time (Start delay time occurrence: scores of ms) Separate Start Simultaneous Start External Start (Terminal Input) Emergency Stop Delay time = function processing time (Start delay time occurrence: scores of s) ZONE 1 / 2 / 3 Output 28 LG PLC

APM (Advanced Position Module) 3. APM Software Package - Operation features and information setting in a parameter format ü WINDOWS-based software üAPM modules support üPowerful parameter editing function (copy, move, undo, redo, etc) üVarious monitoring information supply (operation method of each axis, etc) üProfile tracking and operation monitoring available üProfile graph and circular interpolation simulation available üAvailable to edit operation parameter data in EXCEL 29 LG PLC

APM (Advanced Position Module) ü Operation Parameter - Sets basic operation features and limit value setting for each axis 30 LG PLC

APM (Advanced Position Module) ü Operation Data - Defines separate operation method of each axis, Sub Address, Speed, etc. 31 LG PLC

APM (Advanced Position Module) ü Monitoring (On-line) - Monitors basic operation features and operation status of each axis. 32 LG PLC

APM (Advanced Position Module) ü Profile Tracking (On-line) - Supports real-time monitoring of operation speed change for time axis and saving the tracking screen as a file 33 LG PLC

APM (Advanced Position Module) ü Profile Simulation (Off-line) - Supports virtual operation speed monitoring for each axis and saving its result as a picture file 34 LG PLC

APM (Advanced Position Module) ü Circular Interpolation Simulation (Off-line) - Able to check in advance for the moving trace after position operation with parameter settings when you use circular interpolation function 35 LG PLC

LG PLC HSC (High Speed Counter) New LG Industrial Systems 36 LG PLC

New HSC (High Speed Counter) 1. Main Features ü 4 types for K 300 S (GM 4) / K 200 S (GM 6) ü Separate 2 channels ü Improved pulse input speed (200 Kpps / 500 Kpps) ü Broad counting range (32 bits) ü 7 functions like comparison, Tr output, etc ü Various additional functions 37 LG PLC

New HSC (High Speed Counter) ü Specifications G 4 F-HO 1 A G 4 F-HD 1 A K 200 S (GM 6) Item K 300 S (GM 4) G 6 F-HO 1 A G 6 F-HD 1 A Signal Type Open Collector Line Driver Counting Speed Max. 200 k. Hz Max. 500 k. HZ Counting Range Multiplication -2, 147, 483, 648 ~ + 2, 147, 483, 647 1 -phase input 1 / 2 multiplication 2 -phase input 1 / 2 / 4 multiplication Tr. Output Additional Function OUT 1 / 2 / 3 Counter Clear / Counter Latch / Interval Counter Input period measurement / Counter per Timebase 38 LG PLC

New HSC (High Speed Counter) ü Counter Clear - Changes current value to “ 0” - Additional function mode ( 1 ) - Additional function EN 1000 500 900 500 39 LG PLC

New HSC (High Speed Counter) ü Counter Latch - Latches current value - Additional function mode (2) - Additional function EN 1000 800 CV: 800 500 CV: 500 40 LG PLC

New HSC (High Speed Counter) ü Interval Counter - Monitors the counter value during the interval to count - Additional function mode (3) - Additional function EN Pulse Input 1000 500 750 950 Counter Value 1000 Setting Time 200 500 41 200 LG PLC

New HSC (High Speed Counter) ü Input Period Measurement -Measures the input pulse every one second or during user-defined period of time - Additional -function mode ( 4 / 5) - Additional function EN Pulse Input 950 1000 850 500 300 200 Clocks per sec. 500 250 * Period: mode 4: 1 sec mode 5: user-defined period of time 42 LG PLC

LG PLC PMU (Programmable Monitoring Unit) LG Industrial Systems 43 LG PLC

PMU Lineup PMU-830 12. 1” PMU x 30 Series PMU-730 10. 4” PMU-530 7. 5” PMU-830 TT PMU-730 TT PMU-330 5. 7” PMU-730 ST PMU-530 ST PMU 330 TT PMU 330 ST PMU-330 BT 44 LG PLC

PMU x 30 Series PMU-330 PMU-530 PMU-330 TT PMU-330 ST PMU-330 BT PMU-530 ST • 320 x 240 dot, 5. 5”/5. 7” • 32 bit RISC CPU • Display Element 256 Color TFT (PMU 330 TT) 256 Color STN (PMU 330 ST) Blue & White STN (PMU 330 BT) • Matrix touch-key: 16 x 12/screen • Various bitmap functions bitmap touch/lamp, background bitmap • O/S downloading for version upgrade • Flash Memory (screen: 1 MB/2 MB) • Internal 256 K SRAM (data logging/recipe) • RS-232 C/422 comm. port • Waterproof (IP 65 F) • Size: 206 x 136 x 64 (Panel cut: 198 x 128) • Power: 21 ~ 28 V DC • 640 x 480 dot, 7. 5” • 32 bit RISC CPU • 256 Color STN • Analog touch-key: 640 x 480 • Various bitmap functions bitmap touch/lamp, background bitmap • O/S downloading for version upgrade • Flash Memory (screen: 2 MB) • Internal 256 B SRAM (data logging/recipe) • RS-232 C/422 comm. port • Waterproof (IP 65 F) • Size: 240 x 170 x 62 (Panel cut: 231 x 161) • Power: 21 ~ 28 V DC 45 LG PLC

PMU-x 30 Series PMU 730 PMU-730 TT PMU 830 PMU-730 ST PMU-830 TT • 640 x 480 dot, 10. 4” • 32 bit RISC CPU • Display Element 256 Color TFT (PMU 730 TT) 256 Color STN (PMU 730 ST) • Matrix touch-key: 32 x 24/screen • Various bitmap functions bitmap touch/lamp, background bitmap • O/S downloading for version upgrade • Flash Memory (screen: 2 MB/4 MB) • Internal 256 K SRAM (data logging/recipe) • RS-232 C/422 comm. & printer port • Waterproof (IP 65 F) • Size: 305 x 239 x 55 (Panel cut: 294 x 228) • Power: 85 ~ 265 V AC (Free) • 800 x 600 dot, 12. 1” • 32 bit RISC CPU • 256 Color TFT • Analog touch-key: 800 x 600 • Various bitmap functions bitmap touch/lamp, background bitmap • O/S downloading for version upgrade • Flash Memory (screen: 4 MB) • Internal 256 K SRAM (data logging/recipe) • RS-232 C/422 comm. & printer port • Waterproof (IP 65 F) • Size: 305 x 239 x 55 (Panel cut: 294 x 228) • Power: 85~265 V AC (Free) 46 LG PLC

Numeric & String Display Numeric data display: DEC, HEX, BCD type Displays data with 8 different colours depending on the numeric range variance Data from PLC or controller can be displayed after calculation ASCII CODE, read from PLC or controller, can be displayed with characters 47 LG PLC

Data Setting & Clock Display ★ Key display tag Min/max value of data setting & input range limit available Data input using TENKEY PASSWORD encrypted ★ Clock Display RTC data display (year, month, date, hour, minute, second) using RTC element embedded in PMU 48 LG PLC

Touch Function ★ TOUCH Input function: commands PLC touching a specific region on screen Bitmap touch: Displays different bitmaps according to the device status (ON/OFF) after Touch button operation Caption: Displays 2 letters according to the device status (ON/OFF) after Touch button operation Touch colour: Lamp function embedded in Touch button displays the devices status (ON/OFF) after Touch button operation Maximum 10 functions can be set up with one Touch tag 49 LG PLC

Lamp Function ★ LAMP Tag: displays ON/OFF information of a bit in colour/picture Bitmap lamp: Displays different bitmaps according to the device status (ON/OFF) Caption function: Displays different letters according to the device status (ON/OFF) Data lamp: Displays lamp with 8 colours according to data range 50 LG PLC

Graph Meter graph - Sets the lowest/highest value of data and displays current data in rate - Analog data (voltage, current) display TREND graph - Input value change is visually shown with the time axis - 10 data can be set up with one graph - Logging data and recipe data trend available Others – bar graph, X/Y chart 51 LG PLC

Recipe (parameter moving) Running data of each work are stored in PMU and when work changes, they are batch -transferred to the controller Easy to operate: converts the setup data into EXCEL format 52 LG PLC

Data Logging Data generated during operation are stored in PMU through periodic or conditional data logging Condition setting Operation setting Convenient to report: converts logging data into an EXCEL report DATA LOGGING screen 53 LG PLC

Various Bitmap Functions Background bitmap function: Uses a background bitmap of the same screen resolution Transparent bitmap and lettering functions: Does not display the unnecessary part of bitmap and background letters No limit in size: Available to register regardless of bitmap size (only to be smaller than screen size) Image Character: All fonts available as long as WINDOWS support 54 LG PLC

Simulation Functions Simulates the status of each device's address operation and communication while disconnected with PLC. Monitors data when you turn on each address or input data. RS-232 C Simulation on drawing: If the status of a bit tag (ON/OFF) changes while drawing the screen, the screen changes can be displayed on PC monitor 55 LG PLC

Convenient Memory Management Overall display of PLC address registered in the screen Overall change available in PLC address change Display of PLC address of tags registered in the screen Overall display of the contents of screen User-defined library registration 56 LG PLC

PMU Communication 1: N Communication 1: 1 Serial Communication Connecting more than one PLCs to one PMU through RS-422/485 communication One PLC connection to one PMU RS-232 C 15 m MAX. RS-422/485 500 m MAX • 1: N communication by using RS-422/485 should be organised as choosing identical PLC types 57 LG PLC

PMU Communication N: 1, N: M (N+M ≤ 64) Communication Using MASTER-K/GLOFA-GM Fnet module Fnet 64 stations, 750 m MAX. Enet option module installed in PMU MASTER-K GLOFA-GM (GㅁL-FUEA) 58 LG PLC

PMU Communication PLC Communication with other devices Controls two different PLCs using one PMU 2 nd comm. Ch. RS-232 C Main comm. Ch. RS-232 C/422/485 59 LG PLC

Applicable Equipments PMU Option PMU 830 PMU 730 PMU 530 PMU 330 PMU 710 PMU 320 Built-in Serial comm. Maker Model name O O GOLDSEC-M O O STARCON-MF Inverter Link MASTER-K PLC Loader GLOFA-GM LGIS Type - O RS-485 option board i. H RS-485 option board SPC - O O FARA-N 70/700+ O - MELSEC-A, Qn. A, Q O O MELSEC-FX PLC O FARA-N Mitsubishi PLC RS-485 i. S 5 Samsung i. G 5 O O Fuji PLC MICREX-F - O Omron PLC SYSMAC-C, CS 1 - O Siemens PLC 3964 R - O S 7 -300/400 MPI O - S 7 -200 PPI O - 60 LG PLC

Applicable Equipments PMU 830 PMU 730 PMU 530 PMU 330 PMU 710 PMU 320 Option - O - Progic-8 PLC O O - CP-9200 SH Yaskawa SLC 500[5/03, 04] PLC Link PLC-5 AB Type Loader MP-920 Built-in serial comm. Maker Model name O - Modicon KDT PLC Cymon O O Koyo PLC DL-205/305/405 - O GE Fanuc PLC 90 -30[SNP-X] O - POSCON PLC POSFA phld-1 a/2 a - O Yokokawa PLC FA-M 3 - O Delta PLC DVP-ES - O LGIS PLC MASTER-K GㅁL-FUEA GLOFA-GM PMUㅁㅁㅁ-F PLC GㅁL-FUEA PMUㅁㅁㅁ-E Ethernet PMUㅁㅁㅁ-C Modbus Under development CC Link 61 LG PLC

LG PLC GM 4 -CPUB/C Fast Ethernet MASTER-K 120 S LG Industrial Systems 62 LG PLC

New Product (GM 4 – CPU B/C) 1. GLOFA CPU GMR GM 1/2 GM 3 GM 4 C GM 4/4 B GM 6 GM 7 Direct 7680 16000 /4096 2048 3584 2048 384 10~80 Remote 32000 /16000 4096 32000 2048 /8192 512 - Speed (㎲/Step) 0. 12 0. 5 Program Capacity 2 MB /512 KB 256 KB 1 MB 128 KB 68 KB Data Capacity(KB) 512 KB 128 KB 428 KB 64 KB 32 KB Flash Memory Option 6 M 512 KB 128 KB Option Base No. of Extension 15 31 3 6 3 × 3 Distance 100 m 3 m 15 m 3 m × - Floating ○ ○ X X X Built-in Cnet × × × ○ ○ Loader Conn. RS-232 C ○ ○ ○ ○ USB × × × ○ × × × I/O Capacity 63 LG PLC

New Product (GM 4 – CPU B/C) 2. Down Sizing & High Lebel Functions ü GM 2 Function is moved to GM 4 C GM 4 B GM 4 Direct 3584 2048 Remote 32000 8192 2048 Proce Speed 0. 12 0. 2 Floating Process O X X Program Capacity 1 MB 128 KB Data Capacity 428 KB 26 KB Flash Memory 6 MB 512 KB × Base No. of Extension 6 3 3 Extension Distance 15 m 3 m 3 m I/O 64 LG PLC

New Product (GM 4 – CPU B/C) 3. Network Module GM 4 C High Speed Link Network Module Ethernet GM 4 B GM 4 Total 2 Basic/Extension Basic Base Fnet/Rnet Profibus Devicenet Position of Network Module 4. High Speed Loader Port (USB / High Speed Serial Port ) ü High Speed Downloading via USB Port GM 4 C Loader Port GM 4 B GM 4 USB 12 Mbps × × RS-232 C 115. 2 Kbps 38. 4 Kbps 65 LG PLC

New Product (GM 4 – CPU B/C) 5. Bases and Extension Cables -To realize the Full functions of GM 4 -CPUC, New type Bases, Extension Cables are required. - Old type Bases or Extension Cables are used, the function of only CPU will be upgraded. Basic Base Ext. Base New Ext. Cable CPU Efficiency Base Efficiency Function Old Old New - Full Upgrade - High Speed, 6 Exts. - Support Full functions of GM 4 -CPUC System Old - Partial Upgrade - Low Speed, 3 Exts. - Support Upgraded functions of GM 4 -CPUC (CPU Only) New - Partial Upgrade - Low Speed, 3 Exts. - Support Upgraded functions of GM 4 -CPUC (CPU Only) Old New - Partial Upgrade - Low Speed, 3 Exts. - Support Upgraded functions of GM 4 -CPUC (CPU Only) Old - Partial Upgrade - Low Speed, 3 Exts. - Support Upgraded functions of GM 4 -CPUC (CPU Only) - Names of New type Bases and Extension Cables Basic Base 4 Modules GM 4 -B 4 MH GM 4 -B 6 MH 8 Modules GM 4 -B 8 MH Name Length 0. 6 m G 4 C-E 102 10 m G 4 C-E 601 GM 4 -B 6 EH Length G 4 C-E 061 GM 4 -B 4 EH 6 Modules Name Extension Base 6 m G 4 C-E 152 15 m GM 4 -B 8 EH 66 LG PLC

New-Product (Fast Ethernet) 1. Fast Ethernet ü 100/10 Mbps Fast Ethernet for Industrial systems. ü 100 Base. T, 100 Base. F(Fiber Optic), 10 Base. T, 10 Base. F(Fiber Optic) ü Support 2 type Ethernet - Open Type(Information Level) Ethernet and Dedicated (Between LG PLCs) Ethernet ü Support Internet Service - Mail Server (POP 3, SNMP) - Web Server (Next version) ü Realized High Reliance and functions using 32 Bit Processor. ü Keep the functions of old version Ethernet (GMWin Service, Frame Editor etc. ) Server 100 Base. F (Fiber Optic) MAU HUB HMI PC HUB 100 Base. T (TP) HMI PC 67 LG PLC

New-Product (Fast Ethernet) 2. Specifications ü General Specifications Fast Ethernet (Open) Fast Ethernet (Dedicated) Ethernet Baud Rate 100/10 Mbps Media 100 Base. T/F(Fiber) 10 Base 5/T/F(Fiber) 10 Base 5/2/T Processor 32 Bit RISC Processor 16 Bit Processor Protocol TCP/IP, UDP/IP Data Capacity 200 word / Block (Max 64 Block), 1446 Byte / Frame No. of Channel 16 Ch Token Passing Dedicated Service ● × ● FB Service ● ● ● High Speed Link Service ● ● ● E-Mail Service ● × × Usage Communication between PC(MMI) and LG PLCs Communication between LG PLCs 68 Communication between PC(MMI) and LG PLCs LG PLC

New-Product (MASTER-K 120 S) 1. Characteristic of MASTER-K 120 S √ Main Unit AC Power(85~264 V), IO Points : 60 Points (DC 24 V Input 36 Points, Relay Output 24 Points) Total 120 Points Extension is Possible(3 Modules can be connected to 1 main base) Enlarge P area for Remote control(P 000 ~ P 63 F) √ Various Extension module 10 Points I/O, (DC/Relay), 20 Points I/O(DC/Relay), 10 Points Output (TR) Hybride Analog I/O (A/D 2 Ch, D/A 1 Ch), AI(A/D 4 Ch), AO (D/A 4 Ch, Current Output) Analog Timer(4 Ch), RTC Pack, Memory Pack(G 7 M-256 B, for Back-up the program) RS-422 Module, RS-232 C Module(Modem), FNET, RNET (Master), PNET , DNET (Slave) √ Hign Speed Processing (Speed enlarged 2 times than MK 80 S ) Basic Sequence : 0. 1 ~ 0. 9 us / instruction Application function : some us ~ 10 s of us /instruction Special Module Processing : 100 s of us ~ 1 ms /Module √ Battery-less Back-up Program Back-up : EEPROM (EEPROM Back-up when Edit on Run) *Automatically Data Back-up : Super Capacitor(Over than 2000 h in ) 69 LG PLC

New-Product (MASTER-K 120 S) √ Built-in High Speed Counter (32 bit signed processing) 1 Phase : 100 khz 2 ch, 20 khz 2 ch(Total 4 Ch) 2 Phase : 50 Khz 1 ch, 10 Khz 1 Ch (Total 2 Ch) Additional Function : Ring counter, Value Compare / Band compare, Compare value agreement Interrupt, RPM Function √ Input Processing Functions Input Filtering Function : Set Filtering time (1 ~ 15 ms) Pulse Catch Function : 10 us(P 0, P 1), 50 us(P 2~P 7) External Interrupt Function : 10 us(P 0, P 1), 50 us(P 2~P 7) √ Position Control Function Number of Ch. : 2 Ch(100 Kpps) Operating Mode : Single, Repeat, Automatic, Continuous, Uniform Velocity Operating Additional Function : Return to Origin, Jog Operating, PWM Output √ Enlarging No. of Communication ch. And Functions. Built-in RS-232 C / RS-485 2 Ch(Simultaneous Use is available) Supports User-defined Protocol and Monitoring protocol with KGLWIN √ Add Built-in PID Functions Relay/PRC Auto-tuning / PWM Output Position/Velocity calculation type / Prevention overcrowding Differential Calculation 70 LG PLC