komatsuforest. com. Length measuring 365 •

komatsuforest. com. Length measuring 365 • New design of arm • Side mounted • Bolted to pivoting axle • Measure wheel housing bolted to arm • Patented hydraulic cylinder • Equal pressure • New design of wheel • Double conical wheel bearing • New sensor without moving parts

komatsuforest. com. Length measuring 365 • Pantented new design of cylinder • Faster respons • More equalized pressure on measuring wheel

komatsuforest. com. Length measuring

komatsuforest. com. Length measuring 365 • Pressure for measuring wheel is adjusted in Maxi. Xplorer Pp Dr T P

komatsuforest. com. Length measuring 365 • Pos. 7 must be installed so the grease can get out through the bearing. • Pos. 10 to be locked with Loctite 243 or similar • Pos. 11 must be assembled so the grease can NOT get in contact with sensor • Grease sensor side before assemble • Fill bearing housing with grease before assemble of plug pos. 16 • Check / fill grease every 1000 hours • OBS! When tightening nut pos. 10 (20 Nm) the housing needs to be rotated 360 degrees and then tigthened again 20 Nm. Repeat 3 times

komatsuforest. com. Length measuring 365 • Sensor is locked in one position in housing due to springloaded tension and o-ring. • Magnet is turning together with measuring wheel. • 1024 measuring points / revolution (256 pulses X 4 flanks)