Environment DENSO Eco Vision 2015 Eco Management

Environment

DENSO Eco. Vision 2015 Eco Management Strengthen cooperation with DENSO Group and partners Eco Products Development of environmentally friendly technologies and products Eco Friendly Enhancement of external relationships and information disclosure Eco Factory Reduction of environmental impact in global production This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 2

Environmentally Friendly Products Promoting Recycling Preserving Clean Air • • Monolithic Carrier Air Flow Meter Fuel Injector Spark Plug Stop/Starter High Pressure Fuel Injector Oil Control Valve Variable Displacement Compressor • • HVAC Unit Starter Alternator Power Window Motor Reducing Hazardous Substances • • • Instrument Cluster Air Conditioning Panel Cooling Fan Motors Windshield Wiper System Power Seat Motor Radiator Tank This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 3

Five Key Evaluations before Mass Production [ • Enhance fuel efficiency ] • Reduce volume of refrigerants used, and develop substitutes • Improve recyclables rate • Reduce environmentally hazardous substances • Remove pollutants from exhaust gases This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 4

North American Manufactured Eco-Products Preserving Clean Air Monolithic Carrier The monolithic carrier acts to reduce or oxidize harmful emissions such as hydrocarbons, carbon monoxide, and nitrogen oxides. Air Flow Meter This air flow meter measures the flow rate of air into the intake manifold, resulting in the correct air-fuel ratio for efficient combustion. This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 5

North American Manufactured Eco-Products Preserving Clean Air High-Pressure Fuel Injector The high-pressure fuel injector, developed for gasoline direct-injected engines, allows for more precise controlling of combustion and emissions, which translates to improved fuel economy. Spark Plug Tough metal alloys applied to the tip of the plug ensure proper ignition even during idling, with less fuel consumption and less noise. This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 6

North American Manufactured Eco-Products Preserving Clean Air Stop/Starter Stop/start systems cut the engine when the vehicle is at a stop or in other idle traffic situations, helping improve fuel efficiency by approximately three to five percent and to reduce CO 2 emissions. This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 7

North American Manufactured Eco-Products Preserving Clean Air Oil Control Valve The oil control valve controls the direction of the oil flow and activates the variable camshaft timing valve, providing more fuel savings and power. Variable Displacement Compressor The variable displacement compressor can alter refrigerant displacement to control air conditioner cooling capability, making it highly fuel-efficient. This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 8

North American Manufactured Eco-Products Preserving Clean Air Injector This fuel injector’s atomizing capability dispenses fuel in precise quantities and allows for better mixing with air, increasing fuel efficiency. Promoting Recycling Starter The die cast process reuses 90 percent of internal scrap aluminum. This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 9

North American Manufactured Eco-Products Promoting Recycling HVAC Unit The plastic case on this HVAC (heating, ventilation and air conditioning) unit is molded with 20 percent in-house recycled material. A titanium-based process provides corrosion resistance for the evaporator rather than hexavalent chromium, an environmentally hazardous substance. Lead solder was eliminated from processing operations by a raw material switch from copper to aluminum. This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 10

North American Manufactured Eco-Products Promoting Recycling Alternator A redesigned segment conductor produces a smaller, lighter alternator with higher efficiency and lower noise. Power Window Motor The power window motor is engineered to be the most compact, and is available in multiple output torque levels and three versions of control: standard, sensor and smart. This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 11

North American Manufactured Eco-Products Reducing Hazardous Substances Instrument Cluster & Air Conditioning Panel The instrument cluster and air conditioning panel are manufactured without the anti-corrosive hexavalent chromium, an environmentally hazardous substance that can leak into the underground water table if a product containing the metal is not disposed properly. This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 12

North American Manufactured Eco-Products Reducing Hazardous Substances Cooling Fan Motors The fan motor is manufactured with lead-free electrical brushes. Power Seat Motor The power seat motor is engineered to optimize material usage while maintaining performance and size advantages for today’s innovative, lightweight seat system. This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 13

North American Manufactured Eco-Products Reducing Hazardous Substances Windshield Wiper System The wiper motor is manufactured with lead-free electrical brushes. Radiator Tank (plant-derived resin) The plant-derived resin radiator tank, which is made from castor oil, is green all the way around. Compared to conventional products, it releases less CO 2 emissions into the environment during its life cycle because it is partially made from material extracted from plants, which absorb CO 2 through the photosynthesis process. It also helps conserve oil, a fossil fuel which is being depleted. This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 14

CO 2 Emission Target – DENSO North America 89. 2 90. 0 Reduce CO 2 Emissions 92. 8 83. 4 79. 8 80. 0 T-CO 2/M USD 70. 0 68. 9 65. 3 60. 0 53 50. 0 48 40. 0 47 47. 5 FY 2012 FY 2013 44. 7 42. 8 42. 7 30. 0 20. 0 10. 0 FY 2004 FY 2005 FY 2006 FY 2007 FY 2008 FY 2009 FY 2010 FY 2011 This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. FY 2014 FY 2015 15 FY 2016

Reduce Water Consumption Target – DENSO North America Reduce Water Consumption 400. 00 350. 00 304. 7 300. 00 M 3/M USD 263. 27 250. 00 200. 00 246. 5 221. 1 199. 8 160. 9 202. 15 206. 0 190. 0 185. 0 176. 2 150. 00 149. 55 142. 22 136. 73 139. 42 141. 14 121. 49 100. 00 50. 00 0. 0 FY 2001 FY 2002 FY 2003 FY 2004 FY 2005 FY 2006 FY 2007 FY 2008 FY 2009 FY 2010 FY 2011 FY 2012 FY 2013 FY 2014 FY 2015 FY 2016 This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 16

Reduce Landfill Waste Target – DENSO North America Reduce Landfill Waste 6, 000 5, 554, 439 5, 000, 000 4, 886, 536 4, 838, 626 3, 943, 084 3, 000 2, 272. 893 2, 159, 469 2, 000 1, 380, 726 1, 375, 302 1, 115, 807 967. 336 452, 290 494, 377 195, 621 196, 307 184, 384 96, 473 46, 076 112, 422 kg 1, 000 0. 0 FY 1999 FY 2000 FY 2001 FY 2002 FY 2003 FY 2004 FY 2005 FY 2006 FY 2007 FY 2008 FY 2009 FY 2010 FY 2011 FY 2012 FY 2013 FY 2014 FY 2015 FY 2016 This information is the exclusive property of DENSO CORPORATION. Without their consent, it may not be reproduced or given to third parties. 17