
b1933863932b69f6413f08830c7e75b4.ppt
- Количество слайдов: 54
Document for Technical and Sales Training KX-NS 500 Basic Specification January 14, 2014 Panasonic System Networks PBX SE team This document explains basic specification of KX-NS 500 version 1. It is recommended to know basic specification of KX-TDA 100 D and KX-TDA 600 before reading this document. However it is not required to know KX-TDE, KX-NCP and KX-NS 1000 before reading this document. Specifications are subject to change without notice.
1. Introduction (PBX Line-up) KX-NS 500 is successor of KX-TDA/TDE 100 -200 and KX-NCP with built-in solution based on KX-NS 1000. Max. Ext NS IP/Digital Hybrid PBX TDA as Digital PBX KX-NS 500 Max. 130 Ext TDA 600 Max. 960 Ext TDE/NCP as IP/Digital Hybrid PBX TDE 600 Max. 960 Ext NS Pure IP PBX NS 1000 x 3 + TDA 620 x 5 Max. 1000 Ext 128 TDE 200 Max. 168 Ext TDA 100 D Max. 128 Ext TDA 200 Max. 128 Ext 64 TDA 100 Max. 64 by Power-S TDE 100 Max. 64 by Power-S 24 KX-TE TDA 30 Max. 28 Ext NCP as “TDE 30” Max. 40 Ext Max. 24 Ext Analog Digital Max. Ext = Digital PT + Analog SLT (except D-XDP and except IP Phone) IP (more features) 2
2. Introduction (Feature) KX-NS 500 provides same features and same operations as KX-TDA 100 D. And more features are supported based on KX-TDE/NCP version 7 and KX-NS 1000 version 3. Built-in Solution VM / Recording / UM Call Center / UC / Mobility / Security KX-NS 1000 Version 2. 1 KX-NS 500 NS 1000 version 3 Program by PT N/A Web Program by PT Yes Program by PT Web Program More IP KX-TDE/NCP Version 4 KX-TDE/NCP Version 7 KX-TDA 100 D Program by PT Unified PCMC (Application) Web programming is supported instead of Unified PCMC. Programming by PT is also supported. The specification is same as KX-TDA. 3
3. One Page Sales Point Enough capacity by IP ! SIP for extension and trunk ! Digital Phone / SLT Max. 130 + 30 by D-XDP DISA for Automated AA Business Attendant w/o operator ! Improve 2 -ch DISA Built-in ! Vo. IP Cost Saving Telephone Company IP Phone Max. 128 KX-NS 500 Additionally No need to buy other PBX again to increase capacity in future Caller No need operator to transfer a call PT Analog PT and old Digital PT connection when PBX Cost replacement ! KX-T 74 xx KX-T 75 xx KX-T 77 xx 2 -hour recording for DISA and Simple VM Saving VM, Recording and Business Call center feature by Improve optional SD ! Telephone Company KX-TVM by SD Caller Operator No discard your PT PT = PBX Proprietary Telephone VM Supervisor can record a call.
4. Table of Contents Chapter Contents 1 Configuration 2 More features compare to KX-TDA 100 D 3 Optional Card 4 Activation Key 5 Installation 6 Difference from KX-NS 1000 5
Chapter 1 Configuration 6
Cost Saving 11. Expandability KX-NS 500 has expandability with optional cards and expansion cabinets. - 48 Analog CO or 4 PRI/E 1 with 6 Analog CO (without PRI/E 1 adapter) - 128 SLT with 2 Digital PT or 64 SLT with 66 Digital PT (without D-XDP) You do not need to discard KX-NS 500 to increase capacity in future. KX-NS 500 without option KX-NS 500 6 -CO + 2 -DPT + 16 -SLT 16 -DPT or SLT 6 -CO + 2 -DPT + 16 -SLT KX-NS 520 KX-NS 520 KX-NS 500 32 SLT 64 SLT 96 SLT 128 SLT Connection is like KX-TDA 600 and KX-TDA 620. 7
Version 2 Cost Saving 12. Expandability Capacity can be increased to 1, 000 extensions using KX-NS 500 version 2 software with KX-NS 1000. (Hardware of KX-NS 500 version 2 is same as version 1. ) You do not need to discard KX-NS 500 to increase capacity in future. KX-NS 520 KX-NS 520 KX-NS 520 KX-NS 500 KX-NS 1000 1, 000 Extensions KX-NS 500 IP Network 100 % Feature Transparency like TDA 600 and TDA 620 Max. 15 KX-NS 500 with KX-NS 520 can be slave unit of KX-NS 1000 works as “KX-TDA 600”. KX-NS 500 with KX-NS 520 works as “KX-TDA 620”. 8
Cost Saving 13. Compatibility for Telephone KX-NS 500 has compatibility with Analog PT and old Digital PT. You do not need to discard KX-T 74 xx / KX-T 75 xx Digital PT, when you upgrade PBX from KX-TD series PBX such as KX-TD 1232 to KX-NS 500.
14. Built-in for Main Cabinet Cost Saving You can save cost because required hardware is built-in for KX-NS 500. - 2 -ch DISA or Simple VM / Recording time : 120 min (Simple VM specification is same as ESVM 2 card on OPB 3 card of KX-TDA 100 D. ) - Digital PT 2 -port (+ 2 D-XDP) - SLT 16 -port with caller ID and message waiting - Analog CO 6 -port with caller ID Analog CO can be change to paging port or external BGM port. - 2 -ch internal BGM (WAV file can be saved. ) RS 232 is not supported. - LAN port (10/100 Base TX) / USB port SMDR is available using LAN. - Power supply / External battery port LAN 1 -RJ 45 Analog CO 3 -RJ 45 for 6 -ch DPT SLT 1 -RJ 45 for 2 -DPT 5 -RJ 45 SLT 1 -2 / SLT 3 -4 Power failure transfer for 2 ch (CO-1/2 to SLT 1/2) SLT 5 -8 / SLT 9 -12 SLT 13 -16 10
15. Built-in for Expansion Cabinet Cost Saving Built-in hardware for KX-NS 520 is as follows. - SLT 16 -port with caller ID and message waiting - Power supply / External battery port to KX-NS 500 1 -RJ 45 Power Failure Transfer SLT 2 -RJ 45 for 4 -SLT 5 -RJ 45 for 16 -SLT 11
16. Card Installation for Main Cabinet Two free slots are supported for extension. Another two free slots are for trunk and door phone. Each 1 card SD (M/S/XS) DSP (L/M/S) RMT (Modem) EXP-M (to NS 520) KX-NS 500 Option MPR Max. 1 card Max. 2 cards DHLC 4 (Hybrid) MCSLC 8 (SLT) DPH 2 (Door phone) DLC 8 (DPT) and or (not “and”) Max. 1 card LCOT 6 (Analog CO) Max. 1 card MCSLC 16 (SLT) or (not “and”) PRI 30 / E 1 DLC 16 (DPT) for Optional Trunk or Door for Optional Extension 6 -CO + 2 -DPT + 16 -SLT (Factory Built-in) For example, if DLC 16 is installed, other extension card cannot be installed. DLC card including default 2 -ch does not support KX-T 74 xx/KX-T 75 xx. 12
17. Card Installation for Expansion Cabinet DPH 2 (Door phone) or DPH 2 (Door phone) PRI 30 / E 1 or Max. 2 cards Max. 1 card LCOT 6 (Analog CO) Max. 2 cards LCOT 6 (Analog CO) or DPH 2 (Door phone) DHLC 4 (Hybrid) or / and MCSLC 8 (SLT) Max. 2 cards LCOT 6 (Analog CO) or (not “and”) Max. 1 card or LCOT 6 (Analog CO) PRI 30 / E 1 or DLC 8 (DPT) or (not “and”) Max. 1 card MCSLC 16 (SLT) or (not “and”) DLC 16 (DPT) PRI 30 / E 1 KX-NS 520 Connection to KX-NS 500 (Factory Built-in) for Optional Trunk or Door for Optional Extension 16 -SLT (Factory Built-in) 13
18. Capacity for Trunk Type NS 500 Built-in NS 500 Max. NS 500 + 1 NS 520 NS 500 + 2 NS 520 NS 500 + 3 NS 520 Trunk (Legacy + IP) 6 100 (36+64) 130 (66+64) 160 (96+64) 190 (126+64) Trunk (Legacy) 6 36 (30+6) 66 (30 x 2+6) 96 (30 x 3+6) 126 (30 x 4+6) PRI 30 / E 1 0 30 60 90 120 A+B+P 6 12 24 36 48 A. Analog CO 6 12 24 36 48 B. BGM 6 6 6 P. Paging 6 6 6 Trunk (IP) 0 64 SIP 0 64 H. 323 0 32 Vo. IP DSP card and activation key provide IP trunk for H. 323 and SIP. 14
19. Capacity for Extension Type NS 500 Built-in NS 500 Max. NS 500 + 1 NS 520 NS 500 + 2 NS 520 NS 500 + 3 NS 520 18 (18+0) 162 (34+128) 194 (66+128) 226 (98+128) 258 (130+128) 18 (16+2) 34 (32+2) 66 (64+2) 98 (96+2) 130 (128+2) SLT 16 32 64 96 128 DTxx / T 76 xx without D-XDP 2 18 (16 x 1+2) 34 (16 x 2+2) 50 (16 x 3+2) 66 (16 x 4+2) T 74 xx / T 75 xx / T 77 xx 0 8 16 24 32 20 (20+0) 168 (40+128) 208 (80+128) 248 (120+128) 288 (160+128) 20 (16+4) 40 Not 18 x 2+16 because power supply 80 (40 x 2) 120 (40 x 3) 160 (40 x 4) 4 (2 x 2) 24 (40 -16 SLT) 48 (80 -16 x 2 SLT) 72 (120 -16 x 3 SLT) 96 (160 -16 x 4 SLT) Ext (Legacy + IP) without D-XDP Extension (Legacy) without D-XDP Ext (Legacy + IP) with D-XDP Extension (Legacy) with D-XDP DTxxx / T 76 xx with D-XDP Extension (IP) 0 128 Vo. IP DSP card and activation key provide IP extension for KX-NTxxx / KX-NT based software phone / KX-UTxxx / KX-UDTxxx / SIP Phone by other maker. 15
20. Capacity for Others Type NS 500 Built-in NS 500 Max. Portable Station Cell Station (DPT I/F + IP I/F) NS 500 + 1 NS 520 NS 500 + 2 NS 520 NS 500 + 3 NS 520 128 PS 18 CS (2+16) 20 CS (4+16) 24 CS (8+16) 28 CS (12+16) 32 CS (16+16) 2 CS 4 CS 8 CS 12 CS 16 CS DPT I/F CS (2 ch) 2 CS 4 CS 8 CS 12 CS 16 CS DPT I/F CS (8 ch) 0 CS 2 CS 4 CS 6 CS 8 CS DPT I/F CS IP I/F CS (8 ch) 16 CS SIP I/F CS (4 ch) 16 CS DISA Simple VM Max. 64 ch by DSP 2 ch UM : Built-in TVM 0 ch KX-TVM (DPT I/F) 4 ch + 24 ch 0/0/0 2/2/2 Door phone / Opener / Sensor 24 ch by DSP + SD Card + Activation Key 24 ch x 2 KX-TVM 200 4/4/4 6/6/6 8/8/8 16
Chapter 2 More Features compare to KX-TDA 100 D 17
Cost Saving 21. IP Extension IP Phone including SIP Phone can be installed in remote office without PBX. Telephone charge can be saved for call between main office and branch. Telephone Company Remote Office (Branch) Main Office KX-NS 500 Digital PT 101 SLT 102 VPN Router SLT 103 Remote connection without VPN is also available. IP Network PBX VPN Router KX-NT 104 SIP Pone 105 18
22. IP Software Phone with UC (CA) Business Improve You can take your phone with your PC to your home or hotel. “Same function as Panasonic KX-NT” can be installed to your PC. Panasonic provides UC application Communication Assistant also. Office Home or Hotel KX-NS 500 Digital PT 101 SLT 102 VPN Router SLT 103 Software phone with CA 104 IP Network Panasonic Network Camera You (Boss) can control employees using software phone, CA, and network camera anytime anywhere. VPN Soft Camera 19
23. Capacity Expansion by IP Cost Saving Currently you may need IP phone in remote office only. However when your business expands in future, you can install 128 IP phones in main office and remote office. Main Office KX-NS 500 Max. 130 SLT and Digital PT without D-XDP VPN Router DPT Main Office Remote Office VPN Router SLT IP Phone KX-NS 500 Digital XDP IP Network VPN Router IP Network Remote Office VPN Router DPT SLT Max. 160 SLT and Digital PT with D-XDP = e. Xtra Device Port IP Phone Max. 128 IP-Phone Additionally Total 288 Extensions 20
24. PBX to PBX Connection using IP Cost Saving You can use PBX to PBX H. 323 Network to call extension in other PBX or customer in order to save charge of long distance call. Public Telephone Company (02) Public Telephone Company (03) Public Telephone Company (08) Customer 02 -8765 -4321 Sydney Office Ext 101 02 -3333 -4444 Customer 08 -4321 -8765 IP Network (VPN) KX-NS 500 Ext 102 03 -1234 -5102 Melbourne Office Ext 203 03 -1234 -5203 Ext 204 08 -7777 -6666 Perth Office Ext 305 08 -7777 -6655 When extension users in Melbourne or Perth dials 0/9 -02 -8765 -4321, call is routed automatically through PBX in Sydney. - 02 -xxxx via PBX in Sydney - 03 -xxxx via PBX in Melbourne - 08 -xxxx via PBX in Perth 21
25. PBX to PBX Connection using IP Business Improve More features are supported for PBX to PBX call. This feature works with KX-TDE-NCP version 4 or later and KX-NS PBX.
Cost Saving 26. SIP Trunk Service Even when customer calls call center in UK (for example), KX-NS 500 installed in your country can receive the call using SIP trunk service without high cost for international call. Following is popular example in India using KX-TDE 600. KX-NS 500 can support same feature. in UK Telephone Company SIP Provider (050) IP Network 050 -321 -1200 Office in India SIP Trunk SIP Phone 050 -123 -4567 050 -333 -4444 DPT SLT Dial 050 -321 -1200 23
Business Improve 27. Hospitality using PT Automatic answer of Panasonic PT (PBX Telephone) can work only for call from nurse. This is useful for hospitality. Automatic answer can be disabled for calling from visitor. - Class of service of extension caller (Not called party) can disable automatic answer feature of PT. - Walking COS (temporal COS change) is also available for this feature. Call from nurse Call from other room or visitor Mike, Are you fine? Ring Another example for nurse (1) Ring at first. -> No answer (2) Re-try with Walking COS for automatic answer. 24
28. Paging over DECT Phone Business Improve Paging over Panasonic DECT phone is available for hospitality and so on using conference group call feature. DECT Phone : KX-TCA 175 / KX-TCA 275 / KX-TCA 185 / KX-TCA 285 / KX-TCA 385 3 F CS Announce from Operator DECT w/ headset 2 F Employee DECT w/o headset Announce from Operator CS Reply from Employee 1 F CS (After announcement) I will go to the room. I am on the 3 rd floor now. KX-NS 500 (Announcement ) Can someone go to room 302? TV does not work. Operator Conference Group Call All paged members can listen to both announcement and reply from some user. 25
Chapter 3 Optional Card 26
31. Optional Card for Extension / Trunk Model Symbol Specification KX-NS 5170 DHLC 4 4 -port for any Digital PT / Analog PT / CS (DPT I/F) / KX-TVM (DPT I/F) and 4 -port SLT *) SLT port : without Caller ID and without Message Waiting KX-NS 5171 DLC 8 8 -port for Digital PT : KX-T 76 xx / KX-DTxxx and CS (DPT I/F) / KX-TVM (DPT I/F) KX-NS 5172 DLC 16 16 -port for Digital PT : KX-T 76 xx / KX-DTxxx and CS (DPT I/F) / KX-TVM (DPT I/F) KX-NS 5173 MCSLC 8 8 -port SLT I/F with Caller ID and Message Waiting KX-NS 5174 MCSLC 16 16 -port SLT I/F with Caller ID and Message Waiting KX-NS 5180 LCOT 6 6 -port Analog Trunk I/F with Caller ID KX-NS 5290 PRI 30/E 1 30 -ch ISDN or E 1 by one card Trunk adapter for KX-NS 1000 has compatibility. This occupies IP trunk channels. KX-NS 8188 E 1 adapter on IP trunk by DSP card without activation key KX-NS 8290 PRI adapter on IP trunk by DSP card without activation key ISDN-BRI, T 1, E&M and analog DID card are not supported. Pay tone feature is not available. 27
32. Optional Card for Others Model Symbol Specification KX-NS 5110 DSP-S DISA (30 ch) or Vo. IP ( 61 ch) or mixture KX-NS 5111 DSP-M DISA (62 ch) or Vo. IP (125 ch) or mixture KX-NS 5112 DSP-L DISA (64 ch) or Vo. IP (252 ch) or mixture KX-NS 5162 DPH 2 Each 2 I/F for Door phone / Opener / Sensor KX-NS 5134 SD(XS) Built-in KX-TVM recording time : 40 H KX-NS 5135 SD(S) Built-in KX-TVM recording time : 200 H KX-NS 5136 SD(M) Built-in KX-TVM recording time : 400 H KX-NS 5130 EXP-M Connection for KX-NS 520 3 units KX-TDA 0196 RMT Modem for remote maintenance DSP SD Card Vo. IP Built-in KX-TVM DISA Simple VM SMDR (Calls) No No N/A 2 -ch 1, 000 No Yes N/A 2 -ch 40, 000 Yes No Yes N/A 30 -ch 2 -ch 1, 000 Yes Yes 30 -ch 2 -ch 40, 000 28
33. Vo. IP DSP Card Required DSP can be advised using programming tool without PBX. (Off-line mode) 29
Chapter 4 Activation Key 30
41. Activation Key for Vo. IP IP Trunk Activation Key as Trunk I/F Card KX-NSM 102 2 ch IP Trunk (SIP or H. 323) KX-NSM 104 4 ch KX-NSM 108 8 ch KX-NSM 116 16 ch IP Extension Activation Key as Extension I/F Card KX-NSM 201 KX-NSM 205 Panasonic KX-NT based IP Software phone (and KX-NT/UT hardware phone) 1 ch 5 ch KX-NSM 210 10 ch KX-NSM 220 20 ch KX-NSM 501 KX-NSM 505 Panasonic KX-NT/UT hardware phone (Not including Panasonic KX-NT 700) KX-NSM 510 KX-NSM 520 KX-NSM 701 KX-NSM 705 KX-NSM 710 KX-NSM 720 1 ch 5 ch 10 ch 4 -ch is pre installed. 20 ch SIP hardware/software phone (including Panasonic KX-NT 700) 1 ch 5 ch 10 ch 20 ch Activation keys in this page and following pages are for both KX-NS 500 and KX-NS 1000. 31
42. Activation Key for UM UM (Built-in KX-TVM) Activation Key KX-NSU 002 UM : Automatic Two-way Recording by supervisor KX-NSU 003 UM : Message Backup KX-NSU 102 KX-NSU 104 UM : Channel Expansion as TVM 204 card 2 -ch is pre-installed. KX-NSU 201 UM : E-mail 1 AK for All supervisors 1 AK 2 ch 4 ch 1 mailbox user KX-NSU 205 5 mailbox user KX-NSU 210 10 mailbox user KX-NSU 220 20 mailbox user KX-NSU 299 All mailbox user KX-NSU 301 KX-NSU 305 KX-NSU 310 1 extension user UM : Two-way Recording by user 5 extension user 10 extension user KX-NSU 320 20 extension user KX-NSU 399 All extension user
43. Activation Key for PBX Features PBX Extension Feature Activation Key KX-NSE 101 KX-NSE 105 Extension and Mobile parallel feature 1 extension user 5 extension user KX-NSE 110 10 extension user KX-NSE 120 20 extension user PBX to PBX Network Activation Key KX-NSN 002 QSIG Network with Enhance Feature System Feature Activation Key KX-NSF 101 3 rd party CTI Interface KX-NSA 020 Multiple CTI Connection KX-NSF 201 Built-in web call center report Announcement of waiting order in queue 33
44. Activation Key for UC (Communication Assistant) CA Activation Key KX-NSA 201 1 extension user CA Pro KX-NSA 205 5 extension user KX-NSA 210 10 extension user KX-NSA 240 40 extension user KX-NSA 249 128 extension user KX-NSA 301 CA Supervisor 1 extension user KX-NSA 401 CA Operator Console 1 extension user KX-NSA 901 CA Network Plug-in 1 CA user KX-NSA 905 5 CA user KX-NSA 910 10 CA user KX-NSA 940 40 CA user KX-NSA 949 128 CA user KX-NSA 010 CA Thin Client Server Connection 34
45. Pre-Installed Activation Key Following features are available without buying activation key and without expiration. IP Extension for KX-UT and KX-NT hardware phone : 4 ch - Not for KX-NT 700 and KX-NT based software phone - Not for 3 rd party SIP phone => Easy to sell Panasonic KX-UT and KX-NT UM (Built-in KX-TVM) : 2 ch CA Basic (Built-in server / External server) : All users
46. Pre-Installed Activation Key for Trial 60 -day trial is available before buying activation key for followings. 60 -day can start anytime for each feature. (not start after default clear) Trial cannot be used repeatedly. (only one time) UM (Built-in KX-TVM) : Automatic Two-way Recording by Supervisor UM (Built-in KX-TVM) : Message Backup UM (Built-in KX-TVM) : E-mail (128 mailbox users) UM (Built-in KX-TVM) : 2 Way Recording (30 extension users) Mobile Extension (30 extension users) CA PRO (128 users) CA Supervisor (1 user) CA Operator (1 user) CA Thin Client Server Connection 3 rd party CTI Interface Multiple CTI Connection Built-in ACD Report / Announcement of waiting order in queue 36
47. Activation Key - Condition Activation key is required for CTI server except CA. - When other CTI server application is connected with KX-NS PBX directly, activation key for CTI (server) interface is required. - When other CTI server application is connected through CSTA MUX, activation key for CSTA MUX is required. Activation key for CTI (sever) interface is NOT required in this case. CA Client AK CA Basic / CA Pro etc Panasonic CA (Server) CTI Server AK CA Client AK CSTA MUX AK Other Application (Server) CTI Server AK Not Required Panasonic CSTA MUX Panasonic CA (Server) CTI Server AK Not Required - 2 to 4 CTSA MUX AKs are required for 2 to 4 “other application”. - KX-NS PBX does not support Panasonic PA server and KX-NCV 200. - AK is not required for CA Call Accounting because this uses SMDR interface. - AK is required for application on Panasonic TAPI TSP. Other Application (Server) 37
48. Activation Key - Condition Following activation key for KX-NS 1000 is not required for KX-NS 500. KX-NSM 005 As memory for 31 - 50 IP extensions KX-NSM 010 As memory for 31 -100 IP extensions KX-NSM 030 As memory for 31 -300 IP extensions KX-NSM 099 As memory for 31 -640 IP extensions 38
Chapter 5 Installation 39
51. Location of Installation KX-NS 500 and KX-NS 520 can be installed on wall or in 19 inch rack. Required equipment is packed. On Wall in 19 inch rack It is required to open the top cover of cabinet to install optional cards. 40
52. Connection with Expansion Cabinet KX-NS 500 and KX-NS 520 can be connected directly with straight LAN cable (CAT 5 E). Hub is not required. - This LAN cable is not shipped with KX-NS 520. - IP protocol is not used even using LAN cable. Communication protocol is similar to communication for KX-TDA 600 and KX-TDA 620. - Length of LAN cable has to be less than 3 m because IP protocol is not used and because avoiding trouble by thunder. KX-NS 520 KX-NS 500 Building -1 KX-NS 500 Building -2 KX-NS 520 KX-NS 500 and KX-NS 520 should not be installed in different building. 41
53. Programming using PC is available through LAN or modem. Telephone Company CO / PRI / E 1 Customer’s Office KX-NS 500 Dealer’s Office Port Fwd Internet LAN Router LAN Modem Analog modem is available with KX-TDA 0196. ISDN 64 k digital modem is available through PRI card of KX-NS 500 without KX-TDA 0196. Port forwarding is required for router to connect through LAN from remote location. Port number is 8080. 42
54. Programming through USB Easy Program Independent maintenance port like KX-NS 1000 is NOT supported. However KX-NS 500 USB port with external adapter works as independent maintenance port. KX-NS 500 with adapter supports DHCP server function by default like KX-NS 1000. KX-NS 500 USB Adapter LAN 192. 168. 0. 101 (default) LAN 223. 0. 0. 15 Panasonic System Networks confirmed that following adapters worked with KX-NS 500. Maker Model Name BUFFALO LUA 3 -U 2 -ATX IO DATA ETX 3 -US 2 PCI (Planet) UE-100 TX-G 3 These are using same component. AX 88772 by ASIX 43
55. Web Programming Easy Program Built-in web server supports PBX and VM all programming. - Programming is very easy because programming method is basically same as KX-TDA-TDE-NCP and KX-TVM. - It is not required to install Application (Programming Tool) because Web. MS Internet Explorer and so on are required. Programming for PBX features Same as TDA/TDE !! Programming for VM features Same as TVM !! 44
56. Programming Tool Application (Programming Tool) is required to connect through modem. GUI and Operation for programming are same as web programming. 45
Easy Program 57. Programming using PT Operation for programming is same as KX-TDA 100 D. < Available PT > KX-T 77 xx N/A KX-T 74 xx KX-T 75 xx N/A KX-T 76 xx KX-DT 3 xx KX-DT 5 xx 3 or 6 line LCD Model only KX-NT 3 xx KX-NT 5 xx Followings are added newly. KX-NS 500 1. Confirm IP address of PBX using PT. 2. Connect PBX using customer’s PC by Web for example. 46
Chapter 6 Difference from KX-NS 1000 47
61. Feature Difference KX-NS 500 and KX-NS 1000 have same specification. It is like KX-NCP and KX-TDE. Feature difference is as follows. Feature 1 KX-NS 500 KX-NS 1000 MNT port No but USB port with adapter Yes WAN port Version 2 (Study) by optional card Yes No but SMDR through LAN Yes Version 2 (Study) Yes Fax to e-mail No Yes Sensor to e-mail Yes No Modem Yes No PT Program Yes No RS 232 port One-look network 48
Thank you ! 49
Revision Date No. (*) Change Aug 5 All First draft Sep 6 2 “KX-NS 500 provides same features and same operations as KXTDA 100 D. ” 11 Cable : 5 m to 3 m 17 Example of trunk card combination was added. *) Number in title 50
Revision Date Oct 15 (Oct 18) No. (*) Change 11/14/32 Explanation for cable is moved to No. 52. LAN cable is used. It must be less than 3 m. 52/54 57 Page was added. Available PT for PT programming was added. *) Number in title 51
Revision Date No. (*) Change Nov 12 13 2 -ch DISA / Simple VM : 120 min 20 SIP I/F CS : 4 ch (Not 8 ch) 61 Feature difference from KX-NS 1000 *) Number in title 52
Revision Date No. (*) Dec 3 3/51/56 Change Picture was revised. 13/14/15 Change to page 14/15/13. 13 XDP and Digital XDP are available for DHLC 4. 32 Explanation was revised. 52 KX-NS 500 - KX-NS 520 connection : Straight LAN cable 53 ISDN 64 k digital modem is available. 57 PT program supports IP address reference. *) Number in title 53
Revision Date No. (*) Change Jan 14 13 KX-TDA 0300 and KX-TDA 0350 are not supported. 14 Picture was revised because EXP-M is not factory built-in. 19 Explanation was revised for D-XDP. 61 KX-NS 1000 does not support sensor to e-mail feature. (Network camera integration) *) Number in title 54