Chapter 5 Data Link Layer A note on

Скачать презентацию Chapter 5 Data Link Layer A note on

5d49e1278eae1db0fa933a1db5546195.ppt

Количество слайдов: 123

Chapter 5 Data Link Layer A note on the use of these ppt slides: We’re making these slides freely available to all (faculty, students, readers). They’re in powerpoint form so you can add, modify, and delete slides (including this one) and slide content to suit your needs. They obviously represent a lot of work on our part. In return for use, we only ask the following: q If you use these slides (e. g. , in a class) in substantially unaltered form, that you mention their source (after all, we’d like people to use our book!) q If you post any slides in substantially unaltered form on a www site, that you note that they are adapted from (or perhaps identical to) our slides, and note our copyright of this material. Computer Networking: A Top Down Approach Featuring the Internet, 2 nd edition. Jim Kurose, Keith Ross Addison-Wesley, July 2002. Thanks and enjoy! JFK/KWR All material copyright 1996 -2002 J. F Kurose and K. W. Ross, All Rights Reserved 5: Data. Link Layer 1

Chapter 5: The Data Link Layer Our goals: r understand principles behind data link layer services: m m error detection, correction sharing a broadcast channel: multiple access link layer addressing reliable data transfer, flow control: done! r instantiation and implementation of various link layer technologies 5: Data. Link Layer 2

Chapter 5 outline r 5. 1 Introduction and r 5. 6 Hubs, bridges, and r r r services 5. 2 Error detection and correction 5. 3 Multiple access protocols 5. 4 LAN addresses and ARP 5. 5 Ethernet r r r switches 5. 7 Wireless links and LANs 5. 8 PPP 5. 9 ATM 5. 10 Frame Relay 5: Data. Link Layer 3

Link Layer: Introduction Some terminology: “link” r hosts and routers are nodes (bridges and switches too) r communication channels that connect adjacent nodes along communication path are links m m m wired links wireless links LANs r 2 -PDU is a frame, encapsulates datagram data-link layer has responsibility of transferring datagram from one node to adjacent node over a link 5: Data. Link Layer 4

Link layer: context r Datagram transferred by different link protocols over different links: m e. g. , Ethernet on first link, frame relay on intermediate links, 802. 11 on last link r Each link protocol provides different services m e. g. , may or may not provide rdt over link transportation analogy r trip from Princeton to Lausanne m limo: Princeton to JFK m plane: JFK to Geneva m train: Geneva to Lausanne r tourist = datagram r transport segment = communication link r transportation mode = link layer protocol r travel agent = routing algorithm 5: Data. Link Layer 5

Link Layer Services r Framing, link access: m encapsulate datagram into frame, adding header, trailer m channel access if shared medium m ‘physical addresses’ used in frame headers to identify source, dest • different from IP address! r Reliable delivery between adjacent nodes m we learned how to do this already (chapter 3)! m seldom used on low bit error link (fiber, some twisted pair) m wireless links: high error rates • Q: why both link-level and end-end reliability? 5: Data. Link Layer 6

Link Layer Services (more) r Flow Control: m pacing between adjacent sending and receiving nodes r Error Detection: m errors caused by signal attenuation, noise. m receiver detects presence of errors: • signals sender for retransmission or drops frame r Error Correction: m receiver identifies and corrects bit error(s) without resorting to retransmission r Half-duplex and full-duplex m with half duplex, nodes at both ends of link can transmit, but not at same time 5: Data. Link Layer 7

Adaptors Communicating datagram sending node rcving node link layer protocol frame adapter r link layer implemented in r receiving side “adaptor” (aka NIC) m looks for errors, rdt, flow control, etc m Ethernet card, PCMCI m extracts datagram, passes card, 802. 11 card to rcving node r sending side: m m encapsulates datagram in a frame adds error checking bits, rdt, flow control, etc. r adapter is semi- autonomous r link & physical layers 5: Data. Link Layer 8

Error Detection EDC= Error Detection and Correction bits (redundancy) D = Data protected by error checking, may include header fields • Error detection not 100% reliable! • protocol may miss some errors, but rarely • larger EDC field yields better detection and correction 5: Data. Link Layer 10

Parity Checking Single Bit Parity: Detect single bit errors Two Dimensional Bit Parity: Detect and correct single bit errors 0 0 5: Data. Link Layer 11

Internet checksum Goal: detect “errors” (e. g. , flipped bits) in transmitted segment (note: used at transport layer only) Sender: r treat segment contents as sequence of 16 -bit integers r checksum: addition (1’s complement sum) of segment contents r sender puts checksum value into UDP checksum field Receiver: r compute checksum of received segment r check if computed checksum equals checksum field value: m NO - error detected m YES - no error detected. But maybe errors nonetheless? More later …. 5: Data. Link Layer 12

Checksumming: Cyclic Redundancy Check r view data bits, D, as a binary number r choose r+1 bit pattern (generator), G r goal: choose r CRC bits, R, such that m m m exactly divisible by G (modulo 2) receiver knows G, divides by G. If non-zero remainder: error detected! can detect all burst errors less than r+1 bits r widely used in practice (ATM, HDCL) 5: Data. Link Layer 13

CRC Example Want: D. 2 r XOR R = n. G equivalently: D. 2 r = n. G XOR R equivalently: if we divide D. 2 r by G, want remainder R R = remainder[ D. 2 r G ] 5: Data. Link Layer 14

Multiple Access Links and Protocols Two types of “links”: r point-to-point m PPP for dial-up access m point-to-point link between Ethernet switch and host r broadcast (shared wire or medium) m traditional Ethernet m upstream HFC m 802. 11 wireless LAN 5: Data. Link Layer 16

Multiple Access protocols r single shared broadcast channel r two or more simultaneous transmissions by nodes: interference m only one node can send successfully at a time multiple access protocol r distributed algorithm that determines how nodes share channel, i. e. , determine when node can transmit r communication about channel sharing must use channel itself! r what to look for in multiple access protocols: 5: Data. Link Layer 17

Ideal Mulitple Access Protocol Broadcast channel of rate R bps 1. When one node wants to transmit, it can send at rate R. 2. When M nodes want to transmit, each can send at average rate R/M 3. Fully decentralized: m m no special node to coordinate transmissions no synchronization of clocks, slots 4. Simple 5: Data. Link Layer 18

MAC Protocols: a taxonomy Three broad classes: r Channel Partitioning m m divide channel into smaller “pieces” (time slots, frequency, code) allocate piece to node for exclusive use r Random Access m channel not divided, allow collisions m “recover” from collisions r “Taking turns” m tightly coordinate shared access to avoid collisions 5: Data. Link Layer 19

Channel Partitioning MAC protocols: TDMA: time division multiple access r access to channel in "rounds" r each station gets fixed length slot (length = pkt trans time) in each round r unused slots go idle r example: 6 -station LAN, 1, 3, 4 have pkt, slots 2, 5, 6 idle 5: Data. Link Layer 20

Channel Partitioning MAC protocols: FDMA: frequency division multiple access r channel spectrum divided into frequency bands r each station assigned fixed frequency band r unused transmission time in frequency bands go idle r example: 6 -station LAN, 1, 3, 4 have pkt, frequency bands 2, 5, 6 idle frequency bands time 5: Data. Link Layer 21

Channel Partitioning (CDMA) CDMA (Code Division Multiple Access) r unique “code” assigned to each user; i. e. , code set partitioning r used mostly in wireless broadcast channels (cellular, satellite, r r etc) all users share same frequency, but each user has own “chipping” sequence (i. e. , code) to encode data encoded signal = (original data) X (chipping sequence) decoding: inner-product of encoded signal and chipping sequence allows multiple users to “coexist” and transmit simultaneously with minimal interference (if codes are “orthogonal”) 5: Data. Link Layer 22

CDMA Encode/Decode 5: Data. Link Layer 23

CDMA: two-sender interference 5: Data. Link Layer 24

Random Access Protocols r When node has packet to send m transmit at full channel data rate R. m no a priori coordination among nodes r two or more transmitting nodes -> “collision”, r random access MAC protocol specifies: m how to detect collisions m how to recover from collisions (e. g. , via delayed retransmissions) r Examples of random access MAC protocols: m slotted ALOHA m CSMA, CSMA/CD, CSMA/CA 5: Data. Link Layer 25

Slotted ALOHA Assumptions r all frames same size r time is divided into equal size slots, time to transmit 1 frame r nodes start to transmit frames only at beginning of slots r nodes are synchronized r if 2 or more nodes transmit in slot, all nodes detect collision Operation r when node obtains fresh frame, it transmits in next slot r no collision, node can send new frame in next slot r if collision, node retransmits frame in each subsequent slot with prob. p until success 5: Data. Link Layer 26

Slotted ALOHA Pros r single active node can continuously transmit at full rate of channel r highly decentralized: only slots in nodes need to be in sync r simple Cons r collisions, wasting slots r idle slots r nodes may be able to detect collision in less than time to transmit packet 5: Data. Link Layer 27

$Slotted Aloha efficiency Efficiency is the long-run fraction of successful slots when there’s many$ Slotted Aloha efficiency Efficiency is the long-run fraction of successful slots when there’s many nodes, each with many frames to send r Suppose N nodes with many frames to send, each transmits in slot with probability p r prob that 1 st node has success in a slot = p(1 -p)N-1 r prob that any node has a success = Np(1 -p)N-1 r For max efficiency with N nodes, find p* that maximizes Np(1 -p)N-1 r For many nodes, take limit of Np*(1 -p*)N-1 as N goes to infinity, gives 1/e =. 37 At best: channel used for useful transmissions 37% of time! 5: Data. Link Layer 28

Pure (unslotted) ALOHA r unslotted Aloha: simpler, no synchronization r when frame first arrives m transmit immediately r collision probability increases: m frame sent at t 0 collides with other frames sent in [t 0 -1, t 0+1] 5: Data. Link Layer 29

Pure Aloha efficiency P(success by given node) = P(node transmits). P(no other node transmits in [p 0 -1, p 0] = p. (1 -p)N-1 = p. (1 -p)2(N-1) … choosing optimum p and then letting n -> infty. . . = 1/(2 e) =. 18 Even worse ! 5: Data. Link Layer 30

CSMA (Carrier Sense Multiple Access) CSMA: listen before transmit: r If channel sensed idle: transmit entire frame r If channel sensed busy, defer transmission r Human analogy: don’t interrupt others! 5: Data. Link Layer 31

CSMA collisions spatial layout of nodes collisions can still occur: propagation delay means two nodes may not hear each other’s transmission collision: entire packet transmission time wasted note: role of distance & propagation delay in determining collision probability 5: Data. Link Layer 32

CSMA/CD (Collision Detection) CSMA/CD: carrier sensing, deferral as in CSMA m collisions detected within short time m colliding transmissions aborted, reducing channel wastage r collision detection: m easy in wired LANs: measure signal strengths, compare transmitted, received signals m difficult in wireless LANs: receiver shut off while transmitting r human analogy: the polite conversationalist 5: Data. Link Layer 33

CSMA/CD collision detection 5: Data. Link Layer 34

“Taking Turns” MAC protocols channel partitioning MAC protocols: m share channel efficiently and fairly at high load m inefficient at low load: delay in channel access, 1/N bandwidth allocated even if only 1 active node! Random access MAC protocols m efficient at low load: single node can fully utilize channel m high load: collision overhead “taking turns” protocols look for best of both worlds! 5: Data. Link Layer 35

“Taking Turns” MAC protocols Token passing: Polling: r control token passed from r master node one node to next “invites” slave nodes sequentially. to transmit in turn r token message r concerns: m polling overhead m m latency single point of failure (master) m m m token overhead latency single point of failure (token) 5: Data. Link Layer 36

Summary of MAC protocols r What do you do with a shared media? m Channel Partitioning, by time, frequency or code • Time Division, Code Division, Frequency Division m Random partitioning (dynamic), • ALOHA, S-ALOHA, CSMA/CD • carrier sensing: easy in some technologies (wire), hard in others (wireless) • CSMA/CD used in Ethernet m Taking Turns • polling from a central site, token passing 5: Data. Link Layer 37

LAN technologies Data link layer so far: m services, access error detection/correction, multiple Next: LAN technologies m addressing m Ethernet m hubs, bridges, switches m 802. 11 m PPP m ATM 5: Data. Link Layer 38

LAN Addresses and ARP 32 -bit IP address: r network-layer address r used to get datagram to destination IP network (recall IP network definition) LAN (or MAC or physical or Ethernet) address: r used to get datagram from one interface to another physically-connected interface (same network) r 48 bit MAC address (for most LANs) burned in the adapter ROM 5: Data. Link Layer 39

LAN Addresses and ARP Each adapter on LAN has unique LAN address 5: Data. Link Layer 40

LAN Address (more) r MAC address allocation administered by IEEE r manufacturer buys portion of MAC address space (to assure uniqueness) r Analogy: (a) MAC address: like Social Security Number (b) IP address: like postal address r MAC flat address => portability m can move LAN card from one LAN to another r IP hierarchical address NOT portable m depends on IP network to which node is attached 5: Data. Link Layer 41

Recall earlier routing discussion Starting at A, given IP datagram addressed to B: A 223. 1. 1. 1 223. 1. 2. 1 r look up net. address of B, find B on same net. as A r link layer send datagram to B inside link-layer frame source, dest address B’s MAC A’s MAC addr 223. 1. 1. 2 223. 1. 1. 4 223. 1. 2. 9 B 223. 1. 1. 3 datagram source, dest address A’s IP addr B’s IP addr 223. 1. 3. 27 223. 1. 2. 2 E 223. 1. 3. 2 IP payload datagram frame 5: Data. Link Layer 42

ARP: Address Resolution Protocol Question: how to determine MAC address of B knowing B’s IP address? r Each IP node (Host, Router) on LAN has ARP table r ARP Table: IP/MAC address mappings for some LAN nodes < IP address; MAC address; TTL> m TTL (Time To Live): time after which address mapping will be forgotten (typically 20 min) 5: Data. Link Layer 43

ARP protocol r A wants to send datagram to B, and A knows B’s IP address. r Suppose B’s MAC address is not in A’s ARP table. r A broadcasts ARP query packet, containing B's IP address m all machines on LAN receive ARP query r B receives ARP packet, replies to A with its (B's) MAC address m frame sent to A’s MAC address (unicast) r A caches (saves) IP-to- MAC address pair in its ARP table until information becomes old (times out) m soft state: information that times out (goes away) unless refreshed r ARP is “plug-and-play”: m nodes create their ARP tables without intervention from net administrator 5: Data. Link Layer 44

Routing to another LAN walkthrough: send datagram from A to B via R assume A know’s B IP address A R B r Two ARP tables in router R, one for each IP network (LAN) 5: Data. Link Layer 45

r A creates datagram with source A, destination B r A uses ARP to get R’s MAC address for 111. 110 r A creates link-layer frame with R's MAC address as dest, r r r frame contains A-to-B IP datagram A’s data link layer sends frame R’s data link layer receives frame R removes IP datagram from Ethernet frame, sees its destined to B R uses ARP to get B’s physical layer address R creates frame containing A-to-B IP datagram sends to B A R B 5: Data. Link Layer 46

Ethernet “dominant” LAN technology: r cheap $20 for 100 Mbs! r first widely used LAN technology r Simpler, cheaper than token LANs and ATM r Kept up with speed race: 10, 1000 Mbps Metcalfe’s Ethernet sketch 5: Data. Link Layer 47

Ethernet Frame Structure Sending adapter encapsulates IP datagram (or other network layer protocol packet) in Ethernet frame Preamble: r 7 bytes with pattern 1010 followed by one byte with pattern 10101011 r used to synchronize receiver, sender clock rates 5: Data. Link Layer 48

Ethernet Frame Structure (more) r Addresses: 6 bytes m if adapter receives frame with matching destination address, or with broadcast address (eg ARP packet), it passes data in frame to net-layer protocol m otherwise, adapter discards frame r Type: indicates the higher layer protocol, mostly IP but others may be supported such as Novell IPX and Apple. Talk) r CRC: checked at receiver, if error is detected, the frame is simply dropped 5: Data. Link Layer 49

Unreliable, connectionless service r Connectionless: No handshaking between sending and receiving adapter. r Unreliable: receiving adapter doesn’t send acks or nacks to sending adapter m m m stream of datagrams passed to network layer can have gaps will be filled if app is using TCP otherwise, app will see the gaps 5: Data. Link Layer 50

Ethernet uses CSMA/CD r No slots r adapter doesn’t transmit if it senses that some other adapter is transmitting, that is, carrier sense r transmitting adapter aborts when it senses that another adapter is transmitting, that is, collision detection r Before attempting a retransmission, adapter waits a random time, that is, random access 5: Data. Link Layer 51

Ethernet CSMA/CD algorithm 1. Adaptor gets datagram 4. If adapter detects from and creates frame another transmission while transmitting, aborts and 2. If adapter senses channel sends jam signal idle, it starts to transmit frame. If it senses 5. After aborting, adapter channel busy, waits until enters exponential channel idle and then backoff: after the mth transmits collision, adapter chooses a K at random from 3. If adapter transmits {0, 1, 2, …, 2 m-1}. Adapter entire frame without waits K*512 bit times and detecting another returns to Step 2 transmission, the adapter is done with frame ! 5: Data. Link Layer 52

Ethernet’s CSMA/CD (more) Jam Signal: make sure all other transmitters are aware of collision; 48 bits; Bit time: . 1 microsec for 10 Mbps Ethernet ; for K=1023, wait time is about 50 msec See/interact with Java applet on AWL Web site: highly recommended ! Exponential Backoff: r Goal: adapt retransmission attempts to estimated current load m heavy load: random wait will be longer r first collision: choose K from {0, 1}; delay is K x 512 bit transmission times r after second collision: choose K from {0, 1, 2, 3}… r after ten collisions, choose K from {0, 1, 2, 3, 4, …, 1023} 5: Data. Link Layer 53

CSMA/CD efficiency r Tprop = max prop between 2 nodes in LAN r ttrans = time to transmit max-size frame r Efficiency goes to 1 as tprop goes to 0 r Goes to 1 as ttrans goes to infinity r Much better than ALOHA, but still decentralized, simple, and cheap 5: Data. Link Layer 54

Ethernet Technologies: 10 Base 2 r 10: 10 Mbps; 2: under 200 meters max cable length r thin coaxial cable in a bus topology r repeaters used to connect up to multiple segments r repeater repeats bits it hears on one interface to its other interfaces: physical layer device only! r has become a legacy technology 5: Data. Link Layer 55

10 Base. T and 100 Base. T r 10/100 Mbps rate; latter called “fast ethernet” r T stands for Twisted Pair r Nodes connect to a hub: “star topology”; 100 m max distance between nodes and hub nodes hub r Hubs are essentially physical-layer repeaters: m bits coming in one link go out all other links m no frame buffering m no CSMA/CD at hub: adapters detect collisions m provides net management functionality 5: Data. Link Layer 56

Manchester encoding r Used in 10 Base. T, 10 Base 2 r Each bit has a transition r Allows clocks in sending and receiving nodes to synchronize to each other m no need for a centralized, global clock among nodes! r Hey, this is physical-layer stuff! 5: Data. Link Layer 57

Gbit Ethernet r use standard Ethernet frame format r allows for point-to-point links and shared r r broadcast channels in shared mode, CSMA/CD is used; short distances between nodes to be efficient uses hubs, called here “Buffered Distributors” Full-Duplex at 1 Gbps for point-to-point links 10 Gbps now ! 5: Data. Link Layer 58

Interconnecting LAN segments r Hubs r Bridges r Switches m Remark: switches are essentially multi-port bridges. m What we say about bridges also holds for switches! 5: Data. Link Layer 60

Interconnecting with hubs r Backbone hub interconnects LAN segments r Extends max distance between nodes r But individual segment collision domains become one large collision domian m if a node in CS and a node EE transmit at same time: collision r Can’t interconnect 10 Base. T & 100 Base. T 5: Data. Link Layer 61

Bridges r Link layer device m stores and forwards Ethernet frames m examines frame header and selectively forwards frame based on MAC dest address m when frame is to be forwarded on segment, uses CSMA/CD to access segment r transparent m hosts are unaware of presence of bridges r plug-and-play, self-learning m bridges do not need to be configured 5: Data. Link Layer 62

Bridges: traffic isolation r Bridge installation breaks LAN into LAN segments r bridges filter packets: m same-LAN-segment frames not usually forwarded onto other LAN segments m segments become separate collision domains collision domain bridge LAN segment = hub = host LAN segment LAN (IP network) 5: Data. Link Layer 63

Forwarding How do determine to which LAN segment to forward frame? • Looks like a routing problem. . . 5: Data. Link Layer 64

Self learning r A bridge has a bridge table r entry in bridge table: m (Node LAN Address, Bridge Interface, Time Stamp) m stale entries in table dropped (TTL can be 60 min) r bridges learn which hosts can be reached through which interfaces m when frame received, bridge “learns” location of sender: incoming LAN segment m records sender/location pair in bridge table 5: Data. Link Layer 65

Filtering/Forwarding When bridge receives a frame: index bridge table using MAC dest address if entry found for destination then{ if dest on segment from which frame arrived then drop the frame else forward the frame on interface indicated } else flood forward on all but the interface on which the frame arrived 5: Data. Link Layer 66

Bridge example Suppose C sends frame to D and D replies back with frame to C. r Bridge receives frame from C m notes in bridge table that C is on interface 1 m because D is not in table, bridge sends frame into interfaces 2 and 3 r frame received by D 5: Data. Link Layer 67

Bridge Learning: example r D generates frame for C, sends r bridge receives frame m m notes in bridge table that D is on interface 2 bridge knows C is on interface 1, so selectively forwards frame to interface 1 5: Data. Link Layer 68

Interconnection without backbone r Not recommended for two reasons: - single point of failure at Computer Science hub - all traffic between EE and SE must path over CS segment 5: Data. Link Layer 69

Backbone configuration Recommended ! 5: Data. Link Layer 70

Bridges Spanning Tree r for increased reliability, desirable to have redundant, alternative paths from source to dest r with multiple paths, cycles result - bridges may multiply and forward frame forever r solution: organize bridges in a spanning tree by disabling subset of interfaces Disabled 5: Data. Link Layer 71

Some bridge features r Isolates collision domains resulting in higher total max throughput r limitless number of nodes and geographical coverage r Can connect different Ethernet types r Transparent (“plug-and-play”): no configuration necessary 5: Data. Link Layer 72

Bridges vs. Routers r both store-and-forward devices m routers: network layer devices (examine network layer headers) m bridges are link layer devices r routers maintain routing tables, implement routing algorithms r bridges maintain bridge tables, implement filtering, learning and spanning tree algorithms 5: Data. Link Layer 73

Routers vs. Bridges + and + Bridge operation is simpler requiring less packet processing + Bridge tables are self learning - All traffic confined to spanning tree, even when alternative bandwidth is available - Bridges do not offer protection from broadcast storms 5: Data. Link Layer 74

Routers vs. Bridges Routers + and + arbitrary topologies can be supported, cycling is limited by TTL counters (and good routing protocols) + provide protection against broadcast storms - require IP address configuration (not plug and play) - require higher packet processing r bridges do well in small (few hundred hosts) while routers used in large networks (thousands of hosts) 5: Data. Link Layer 75

Ethernet Switches r Essentially a multir r interface bridge layer 2 (frame) forwarding, filtering using LAN addresses Switching: A-to-A’ and B-to -B’ simultaneously, no collisions large number of interfaces often: individual hosts, star -connected into switch m Ethernet, but no collisions! 5: Data. Link Layer 76

Ethernet Switches r cut-through switching: frame forwarded from input to output port without awaiting for assembly of entire frame m slight reduction in latency r combinations of shared/dedicated, 10/1000 Mbps interfaces 5: Data. Link Layer 77

Not an atypical LAN (IP network) Dedicated Shared 5: Data. Link Layer 78

Summary comparison 5: Data. Link Layer 79

IEEE 802. 11 Wireless LAN r 802. 11 b m 2. 4 -5 GHz unlicensed radio spectrum m up to 11 Mbps m direct sequence spread spectrum (DSSS) in physical layer • all hosts use same chipping code m widely deployed, using base stations r 802. 11 a m 5 -6 GHz range m up to 54 Mbps r 802. 11 g m 2. 4 -5 GHz range m up to 54 Mbps r All use CSMA/CA for multiple access r All have base-station and ad-hoc network versions 5: Data. Link Layer 81

Base station approch r Wireless host communicates with a base station m base station = access point (AP) r Basic Service Set (BSS) (a. k. a. “cell”) contains: m wireless hosts m access point (AP): base station r BSS’s combined to form distribution system (DS) 5: Data. Link Layer 82

Ad Hoc Network approach r No AP (i. e. , base station) r wireless hosts communicate with each other m to get packet from wireless host A to B may need to route through wireless hosts X, Y, Z r Applications: m “laptop” meeting in conference room, car m interconnection of “personal” devices m battlefield r IETF MANET (Mobile Ad hoc Networks) working group 5: Data. Link Layer 83

IEEE 802. 11: multiple access r Collision if 2 or more nodes transmit at same time r CSMA makes sense: m get all the bandwidth if you’re the only one transmitting m shouldn’t cause a collision if you sense another transmission r Collision detection doesn’t work: hidden terminal problem 5: Data. Link Layer 84

IEEE 802. 11 MAC Protocol: CSMA/CA 802. 11 CSMA: sender - if sense channel idle for DISF sec. then transmit entire frame (no collision detection) -if sense channel busy then binary backoff 802. 11 CSMA receiver - if received OK return ACK after SIFS (ACK is needed due to hidden terminal problem) 5: Data. Link Layer 85

Collision avoidance mechanisms r Problem: m two nodes, hidden from each other, transmit complete frames to base station m wasted bandwidth for long duration ! r Solution: m small reservation packets m nodes track reservation interval with internal “network allocation vector” (NAV) 5: Data. Link Layer 86

Collision Avoidance: RTS-CTS exchange r sender transmits short RTS (request to send) packet: indicates duration of transmission r receiver replies with short CTS (clear to send) packet m notifying (possibly hidden) nodes r hidden nodes will not transmit for specified duration: NAV 5: Data. Link Layer 87

Collision Avoidance: RTS-CTS exchange r RTS and CTS short: m collisions less likely, of shorter duration m end result similar to collision detection r IEEE 802. 11 allows: m CSMA/CA: reservations m polling from AP 5: Data. Link Layer 88

A word about Bluetooth r Low-power, small radius, wireless networking technology m 10 -100 meters r omnidirectional m not line-of-sight infared r Interconnects gadgets r 2. 4 -2. 5 GHz unlicensed radio band r up to 721 kbps r Interference from wireless LANs, digital cordless phones, microwave ovens: m frequency hopping helps r MAC protocol supports: m error correction m ARQ r Each node has a 12 -bit address 5: Data. Link Layer 89

Point to Point Data Link Control r one sender, one receiver, one link: easier than broadcast link: m no Media Access Control m no need for explicit MAC addressing m e. g. , dialup link, ISDN line r popular point-to-point DLC protocols: m PPP (point-to-point protocol) m HDLC: High level data link control (Data link used to be considered “high layer” in protocol stack! 5: Data. Link Layer 91

PPP Design Requirements [RFC 1557] r packet framing: encapsulation of network-layer r r datagram in data link frame m carry network layer data of any network layer protocol (not just IP) at same time m ability to demultiplex upwards bit transparency: must carry any bit pattern in the data field error detection (no correction) connection liveness: detect, signal link failure to network layer address negotiation: endpoint can learn/configure each other’s network address 5: Data. Link Layer 92

PPP non-requirements r no error correction/recovery r no flow control r out of order delivery OK r no need to support multipoint links (e. g. , polling) Error recovery, flow control, data re-ordering all relegated to higher layers! 5: Data. Link Layer 93

PPP Data Frame r Flag: delimiter (framing) r Address: does nothing (only one option) r Control: does nothing; in the future possible multiple control fields r Protocol: upper layer protocol to which frame delivered (eg, PPP-LCP, IPCP, etc) 5: Data. Link Layer 94

PPP Data Frame r info: upper layer data being carried r check: cyclic redundancy check for error detection 5: Data. Link Layer 95

Byte Stuffing r “data transparency” requirement: data field must be allowed to include flag pattern <01111110> m Q: is received <01111110> data or flag? r Sender: adds (“stuffs”) extra < 01111110> byte after each < 01111110> data byte r Receiver: m two 01111110 bytes in a row: discard first byte, continue data reception m single 01111110: flag byte 5: Data. Link Layer 96

Byte Stuffing flag byte pattern in data to send flag byte pattern plus stuffed byte in transmitted data 5: Data. Link Layer 97

PPP Data Control Protocol Before exchanging networklayer data, data link peers must r configure PPP link (max. frame length, authentication) r learn/configure network layer information m for IP: carry IP Control Protocol (IPCP) msgs (protocol field: 8021) to configure/learn IP address 5: Data. Link Layer 98

Asynchronous Transfer Mode: ATM r 1990’s/00 standard for high-speed (155 Mbps to 622 Mbps and higher) Broadband Integrated Service Digital Network architecture r Goal: integrated, end-end transport of carry voice, video, data m meeting timing/Qo. S requirements of voice, video (versus Internet best-effort model) m “next generation” telephony: technical roots in telephone world m packet-switching (fixed length packets, called “cells”) using virtual circuits 5: Data. Link Layer 100

ATM architecture r adaptation layer: only at edge of ATM network m data segmentation/reassembly m roughly analagous to Internet transport layer r ATM layer: “network” layer m cell switching, routing r physical layer 5: Data. Link Layer 101

ATM: network or link layer? Vision: end-to-end transport: “ATM from desktop to desktop” m ATM is a network technology Reality: used to connect IP backbone routers m “IP over ATM” m ATM as switched link layer, connecting IP routers 5: Data. Link Layer 102

ATM Adaptation Layer (AAL) r ATM Adaptation Layer (AAL): “adapts” upper layers (IP or native ATM applications) to ATM layer below r AAL present only in end systems, not in switches r AAL layer segment (header/trailer fields, data) fragmented across multiple ATM cells m analogy: TCP segment in many IP packets 5: Data. Link Layer 103

ATM Adaptation Layer (AAL) [more] Different versions of AAL layers, depending on ATM service class: r AAL 1: for CBR (Constant Bit Rate) services, e. g. circuit emulation r AAL 2: for VBR (Variable Bit Rate) services, e. g. , MPEG video r AAL 5: for data (eg, IP datagrams) User data AAL PDU ATM cell 5: Data. Link Layer 104

AAL 5 - Simple And Efficient AL (SEAL) r AAL 5: low overhead AAL used to carry IP datagrams m 4 byte cyclic redundancy check m PAD ensures payload multiple of 48 bytes m large AAL 5 data unit to be fragmented into 48 byte ATM cells 5: Data. Link Layer 105

ATM Layer Service: transport cells across ATM network r analagous to IP network layer r very different services than IP network layer Network Architecture Internet Service Model Guarantees ? Congestion Bandwidth Loss Order Timing feedback best effort none ATM CBR ATM VBR ATM ABR ATM UBR constant rate guaranteed minimum none no no no yes yes yes no no (inferred via loss) no congestion yes no no 5: Data. Link Layer 106

ATM Layer: Virtual Circuits r VC transport: cells carried on VC from source to dest m call setup, teardown for each call before data can flow m each packet carries VC identifier (not destination ID) m every switch on source-dest path maintain “state” for each passing connection m link, switch resources (bandwidth, buffers) may be allocated to VC: to get circuit-like perf. r Permanent VCs (PVCs) m long lasting connections m typically: “permanent” route between to IP routers r Switched VCs (SVC): m dynamically set up on per-call basis 5: Data. Link Layer 107

ATM VCs r Advantages of ATM VC approach: m Qo. S performance guarantee for connection mapped to VC (bandwidth, delay jitter) r Drawbacks of ATM VC approach: m Inefficient support of datagram traffic m one PVC between each source/dest pair) does not scale (N*2 connections needed) m SVC introduces call setup latency, processing overhead for short lived connections 5: Data. Link Layer 108

ATM Layer: ATM cell r 5 -byte ATM cell header r 48 -byte payload m Why? : small payload -> short cell-creation delay for digitized voice m halfway between 32 and 64 (compromise!) Cell header Cell format 5: Data. Link Layer 109

ATM cell header r VCI: virtual channel ID m will change from link to link thru net r PT: Payload type (e. g. RM cell versus data cell) r CLP: Cell Loss Priority bit m CLP = 1 implies low priority cell, can be discarded if congestion r HEC: Header Error Checksum m cyclic redundancy check 5: Data. Link Layer 110

ATM Physical Layer (more) Two pieces (sublayers) of physical layer: r Transmission Convergence Sublayer (TCS): adapts ATM layer above to PMD sublayer below r Physical Medium Dependent: depends on physical medium being used TCS Functions: m Header checksum generation: 8 bits CRC m Cell delineation m With “unstructured” PMD sublayer, transmission of idle cells when no data cells to send 5: Data. Link Layer 111

ATM Physical Layer Physical Medium Dependent (PMD) sublayer r SONET/SDH: transmission frame structure (like a container carrying bits); m bit synchronization; m bandwidth partitions (TDM); m several speeds: OC 3 = 155. 52 Mbps; OC 12 = 622. 08 Mbps; OC 48 = 2. 45 Gbps, OC 192 = 9. 6 Gbps r TI/T 3: transmission frame structure (old telephone hierarchy): 1. 5 Mbps/ 45 Mbps r unstructured: just cells (busy/idle) 5: Data. Link Layer 112

IP-Over-ATM Classic IP only r 3 “networks” (e. g. , LAN segments) r MAC (802. 3) and IP addresses IP over ATM r replace “network” (e. g. , LAN segment) with ATM network r ATM addresses, IP addresses ATM network Ethernet LANs 5: Data. Link Layer 113

IP-Over-ATM Issues: r IP datagrams into ATM AAL 5 PDUs r from IP addresses to ATM addresses m just like IP addresses to 802. 3 MAC addresses! ATM network Ethernet LANs 5: Data. Link Layer 114

Datagram Journey in IP-over-ATM Network r at Source Host: m IP layer maps between IP, ATM dest address (using ARP) m passes datagram to AAL 5 m AAL 5 encapsulates data, segments cells, passes to ATM layer r ATM network: moves cell along VC to destination r at Destination Host: m AAL 5 reassembles cells into original datagram m if CRC OK, datagram is passed to IP 5: Data. Link Layer 115

Frame Relay Like ATM: r wide area network technologies r Virtual-circuit oriented r origins in telephony world r can be used to carry IP datagrams m can thus be viewed as link layers by IP protocol 5: Data. Link Layer 117

Frame Relay r Designed in late ‘ 80 s, widely deployed in the ‘ 90 s r Frame relay service: m no error control m end-to-end congestion control 5: Data. Link Layer 118

Frame Relay (more) r Designed to interconnect corporate customer LANs m typically permanent VC’s: “pipe” carrying aggregate traffic between two routers m switched VC’s: as in ATM r corporate customer leases FR service from public Frame Relay network (eg, Sprint, ATT) 5: Data. Link Layer 119

Frame Relay (more) flags address data CRC flags r Flag bits, 01111110, delimit frame r address: m 10 bit VC ID field m 3 congestion control bits • FECN: forward explicit congestion notification (frame experienced congestion on path) • BECN: congestion on reverse path • DE: discard eligibility 5: Data. Link Layer 120

Frame Relay -VC Rate Control r Committed Information Rate (CIR) m defined, “guaranteed” for each VC m negotiated at VC set up time m customer pays based on CIR r DE bit: Discard Eligibility bit m Edge FR switch measures traffic rate for each VC; marks DE bit m DE = 0: high priority, rate compliant frame; deliver at “all costs” m DE = 1: low priority, eligible for congestion discard 5: Data. Link Layer 121

Frame Relay - CIR & Frame Marking r Access Rate: rate R of the access link between source router (customer) and edge FR switch (provider); 64 Kbps < R < 1, 544 Kbps r Typically, many VCs (one per destination router) multiplexed on the same access trunk; each VC has own CIR r Edge FR switch measures traffic rate for each VC; it marks (ie DE = 1) frames which exceed CIR (these may be later dropped) r Internet’s more recent differentiated service uses similar ideas 5: Data. Link Layer 122

Chapter 5: Summary r principles behind data link layer services: m error detection, correction m sharing a broadcast channel: multiple access m link layer addressing, ARP r link layer technologies: Ethernet, hubs, bridges, switches, IEEE 802. 11 LANs, PPP, ATM, Frame Relay r journey down the protocol stack now OVER! m next stops: multimedia, security, network management 5: Data. Link Layer 123