1. Paste conductive fiber on main board. Remove

Скачать презентацию 1. Paste conductive fiber on main board. Remove Скачать презентацию 1. Paste conductive fiber on main board. Remove

1015_gps_replacement.ppt

  • Размер: 872 Кб
  • Количество слайдов: 3

Описание презентации 1. Paste conductive fiber on main board. Remove по слайдам

 1. Paste conductive fiber on main board. Remove TP, LCD snap-fit,  volume and power 1. Paste conductive fiber on main board. Remove TP, LCD snap-fit, volume and power key FPC. Remove screws on main board Paste conductive fiber here. Note: Make sure fiber edge covers and is within this area to avoid circuit with components or poor contact with pad on main board. Do not forget to install three screws on main board. X 7 GPS Replacement Procedure

 X 7 GPS Replacement Procedure 2. Paste antenna on rear cover Paste block-up foam here. X 7 GPS Replacement Procedure 2. Paste antenna on rear cover Paste block-up foam here. Tear out rear sticker per GPS antenna breaking line. Paste antenna well after fixing position. Match antenna to the position on rear cover.

 X 7 GPS Replacement Procedure 2. Paste antenna on rear cover GPS antenna is pasted X 7 GPS Replacement Procedure 2. Paste antenna on rear cover GPS antenna is pasted and external surface cleaning is done. Inside antenna, tear out rear sticker and fix antenna position. 1. After fixing position, use pincer or other tools to press antenna. Avoid direct hand contact. 2. Use anti-dust cloth with alcohol to clean antenna before assemble rear cover.